LifeTrac 6 Modules

Important Links

LifeTrac Development Brief

LifeTrac 6 Baseline Product Requirements

1. Dozuki
   1. LifeTrac 6
   2. Module - Power Cube
   3. Module - Cab Frame
   4. Module - Foot Pedals
   5. Module - Bobcat Standard Quick Attach
   6. Module - Loader Arms
   7. Module - Pivot

Collaborators' Logs

Jonathan's Log

Dave's Log

Scott's Log

Leandra's Log

Lucas' Log

Cory's Log

Chris DeAngelis' Log

Jean-Baptiste's Log

LifeTrac 6 Full Assembly

Edit This Drawing ^^

LifeTrac Assembly

File:LifeTrac6.skp

Design Change Proposals

• ground hug pivot with 4x1 plate welded component
  • File:LifeTrac6dorkmo20130909.skp
• hydraulic mounts to arms
  • 3 bolts holding base pieces in place
  • File:LifeTrac6dorkmo20130909-3.skp
• pivot cylinder mounted above or below upper pivot point
  • requires extending 4x4 for the pivot to be extended 4inches and bolt moved.
  • File:Pivotmount20130912.skp

• quick attach module using 4x4 based on previous design
  • File:LifeTrac 6 (v9-17-13 dorkmo).skp

PowerCube

Edit This Drawing ^^

Module - Power Cube Product Development Board

File:LifeTrac6 PowerCube.skp

Cab

Cab Design Requirements

Edit

Module - Cab Frame Product Development Board

Cab module Sketchup File

File:CabModule.skp

File:Seat3550.skp

Hydraulic Valves Sketchup Files

Hydraulic Connections

Edit this Google Doc^^

---

Edit this Google Doc ^^

Controller Mounting Plate Drawings

• 
• 

File:2 Spool Mounting Plate.pdf

File:3 Spool Mounting Plate.pdf

3 Spool Joystick Loader Control Valve

Item Checkout Page

Edit this Google Drawing^^

2 Spool Joystick Loader Control Valve

Item Checkout Page

Edit this Google Drawing^^

Hydraulic Flow Schematic

Edit this Google Doc ^^

Leandra's Log

Jonathan's Log

Loader Arm Submodules

Module - Loader Arms Product Development Board

Edit This Drawing

File:Loader Arm.skp

Loader Arm

Auxiliary Mount Submodule

Edit this drawing ^^

File:Auxiliary Mount.skp

New Bobcat Quick Attach Module

File:BobCat Quick Attach.skp

File:BobCat Quick Attach w Plate.skp

• 
• 
• 
• 
• 
• 
• 
• 

Quick Attach

Module - Bobcat Standard Quick Attach Product Development Board

File:Quick Attach.skp

Bobcat_Standard_Quick_Attach_for_LifeTrac

Front WheelBase

Wheel Mount

File:Wheel Mount.skp

Quick Attach Wheel Module

Quick_Attach_Wheel_Module

Modular Wheel Units

Future Gearbox Module

Figured out how to use the roller chain design accelerator in AutoDesk Inventor. Here's all the specs and calculations for the chain & sprockets I put on (The sprockets are the ones we already use, and the chain's now single instead of double.)

• 
• 
• 
• 
• 
• 

File:Gearbox.skp

Chain and Sprocket Specs & Calculations

• 
• 

Benefits to the New Gearbox Design

The new box has the following benefits:

• The box is totally reversible in any orientation for the four wheels.

• The same motor sits adjacent to the drive shaft instead of in-line, making the box only 20" long instead of 30"
  • This enables us to narrow the wheelbase considerably (which is definitely needed in order to fit the tractor safely on any trailer other than a semi).

• Still modular - you can use it in other applications as well.
  • Gives the option for expansion into narrower wheel-based vehicles (Such as the Car or MicroTrac)

• Allows for potential gear shifting & speedier movement if you want to add different size sprockets

• Stronger and shorter 3" drive shaft instead of 2" (Less likely to break)
  • This also means that using skid steering becomes a viable option again

• Easily serviceable:
  • Both sides are open with plenty of lengthwise room to slip the motor, sprockets, and bearings out if needed.
  • Hydraulic motor inputs/outputs easily accessible.
  • Clamp is essentially just a large C Clamp with two long bolts. When removed, the whole box comes out.

Rear WheelBase

Edit This Drawing

File:Rear Wheelbase.skp

Articulated Steering Pivot

Edit This Drawing ^^

Module - Pivot Product Development Board

File:SteeringPivot.skp