Power Cube II: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Redirected page to Power Cube)
 
(18 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<html>
#redirect [[Power Cube]]
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/8FceP-LCSpQ&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/8FceP-LCSpQ&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
</html>
 
=Parts List=
Last updated 26 August, 2010
 
[[Image:pc2engine.jpg|thumb|Power Cube II engine]]
[[Image:pc2suctionstrainer.jpg|thumb|Suction strainer, 14 gpm]]
[[Image:pc2suctionstrainer2.jpg|thumb|Suction strainer, 23 gpm]]
[[Image:pc2hydpump976.jpg|thumb|Hydraulic pump, 14 gpm]]
 
==Frame==
*1/4"x4"x4" mild steel square tubing - 22 feet @$8.15/foot - $180 - 286 lb
*Quick attach system
 
[[Image:fillerbreather.jpg|thumb|Hydraulic and gasoline filler/breather.]]
==Engine==
*18 hp Engine - $479 - [http://www.amazon.com/gp/product/B001LPFGSY/ref=oss_product]- 81 lb. Sorry, steam engine is forthcoming.
**Note: engine spins counterclockwise (CCW) from PTO side, so pump must have clockwise (CW) rotation
*27 hp engine - $750 - [https://www.surpluscenter.com/item.asp?item=28-1747&catname=hydraulic]
*Fuel tank filler and breather - [[https://www.surpluscenter.com/item.asp?item=9-7286&catname=hydraulic]]
*Fuel tank fuel line barb with shutoff
*Battery
*Starter solenoid
*Starter switch, shutoff switch - key with spring return?
*Battery cables
*Throttle cable
*Choke cable
 
==Engine Coupling to Pump==
*Coupler half, 5/8" - [http://www.mcmaster.com/#6408k15/=1qajma $10]
*Coupler half, 1" - [http://www.mcmaster.com/#6408k15/=1qakef $10]
*Solid spider - [http://www.mcmaster.com/#6408k95/=1qale7 $14]
 
==Pump==
*Hydraulic pump - 0.677 cu in, 5/8" keyed shaft, 10.1 gmp @3600 RPM, 3000 PSI max, 4000 RPM max - [https://www.surpluscenter.com/item.asp?UID=2009050413295892&item=9-1897-B&catname=hydraulic $180]
*Pump outlet - SAE 10 to 1/2 NPTM straight - [https://www.surpluscenter.com/item.asp?UID=2009050516281116&item=9-6401-10-8&catname=hydraulic $1.89][https://www.surpluscenter.com/item.asp?item=9-4604-12-12&catname=hydraulic]
*Pump inlet - Sae 12 to 3/4" hose barb -
*1/2" quick coupler - same as above - $16
*Suction Hose
*3/4 NPTM to hose barb elbow connector - [https://www.surpluscenter.com/item.asp?UID=2009050516253455&item=9-4501-12-12&catname=hydraulic $4.69]
*3/4 NPTM to hose barb straight connector for second PowerCube - [https://www.surpluscenter.com/item.asp?catname=hydraulic&item=9-4404-12-12 $3.95]
*Pump inlet - SAE 12 to 3/4 hose barb connector - [https://www.surpluscenter.com/item.asp?UID=2009050516281116&item=9-4604-12-12&catname=hydraulic $4.69]
 
==Engine Mounting and Pump Mount Plate==
*Pump mount plate - 1/4"x6"x8"
*Engine mounting -
 
==Pressure Bypass Safety Valve==
 
*<span style="color:green">[1] 1/2" NPT Bypass valve - [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
*[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
 
==Reservoir==
 
*<span style="color:red">Suction strainer, 1.5" - [https://www.surpluscenter.com/item.asp?item=9-7290-100&catname=hydraulic] - $20
**<span style="color:red">Use this for single [[Power Cube]]
**1-1/2" NPT coupling for threading suction strainer into frame - found at big box hardware
*<span style="color:green">Suction strainer, 2" - [https://www.surpluscenter.com/item.asp?item=9-7290-125&catname=hydraulic] - $23
**<span style="color:green">Use for dual Power Cubes
**<span style="color:green">Use 2" coupler from bix box store to thread into Power Cube frame
*<span style="color:green">Hydraulic pump - 10 gpm at 3600 rpm, CW rotation - from Power Cube I - [http://openfarmtech.org/index.php/File:677hydpump.jpg]
*<span style="color:green">Hydraulic pump - 14 gpm at 3600 rpm, CW rotation - from Power Cube I - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=hydraulic]
*[1] 20 GPM return Line Filter - [https://www.surpluscenter.com/item.asp?item=9-059&catname=hydraulic]
*[1] 3/4" quick coupler for return line to filter
*[1] 3/4" NPT Swivel for return line filter going into frame - [https://www.surpluscenter.com/item.asp?item=9-1404-12-12&catname=hydraulic]
*[2] 3/4" NPT hex nip on both sides of filter - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]
*[1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [https://www.surpluscenter.com/item.asp?item=9-5406-16-12&catname=hydraulic]
*[2] 1/2" quick couplers for main power lines
 
==Hoses==
*[1] 2 foot hose from pump outlet to return line filter - [https://www.surpluscenter.com/item.asp?item=905-1224&catname=hydraulic]
*3/4" suction hose
 
=Shopping List Summary=
[[Image:balanceofpc2.jpg]]
 
=PC II BOM=
*Frame metal - $180
*Motor mounting structure - $20
*Pump mount plate - $5
*[1] Engine - $479
*[1] Pump - $180
*[1] Motor to pump coupler - $34
**Flexible Spider Shaft Coupling Hub 5/8" Bore, 2-7/64" OD, with Keyway - $10
**Flexible Spider Shaft Coupling Hub 1" Bore, 2-7/64" OD, with Keyway - $10
**Hytrel Spider for 2-7/64" Outside Diameter Flexible Spider Shaft Coupling Hub - $14
Suction Line:
*Suction strainer - $23
*[1] 3/4" barb elbow - $5
*[1] 3/4" barb - $4
*[1] 3/4" barb inlet to pump - $5
*[2] 3/4" close nip - $4
*[1] 2" coupling half - $3
*[1] 1-1/4" close nip - $2
*[1] 1-1/4" elbow - $4
*[1] 1-1/4" to 1" reducer bushing - $2.50
*[1] 1" tee - $2
*[2] 1"-3/4" bushing - $4
 
Return line
*[1] 3/4" swivel - $3.50
*[1] 3/4" coupler - $2
*[1] 3/4" tee -
*[1] Filter - $17
 
*[1] Quick coupler, 1/4" - $15
*[2] Quick coupler, 1/2" - $32
*[1] Quick Coupler, 3/4" - $30
*[1] Pressure relief valve - $38
*
 
*[1] Fuel line barb with shutoff -
*[1] Battery - $25
*Battery cables -
*Throttle cable -
*Choke cable -
*Starter Solenoid - $8
*Starting switch and wiring
*
$1127 to here, without missing items.
[[Category:Power Cube]]

Latest revision as of 03:52, 29 January 2012

Redirect to:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_II&oldid=52666"