Supervolcano Nozzle: Difference between revisions
Jump to navigation
Jump to search
(→Clones) |
(→Basics) |
||
| (16 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Hint|E3D site shows [[200g/hr Print Rate]], or about 5kg/day.}} | |||
=Basics= | |||
*Supervolcano is the fastest nozzle and extruder - capable of extruding up to 10 lb of material per day. | |||
**(This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the [[Golliath Hotend]] | |||
*For example, print pavers at 10 lb each per day. With 10 lb block - equivalent to - | |||
=Other Brands= | |||
*Mosquito - 60 mm3/sec TPU [https://www.sliceengineering.com/products/mosquito-prime?variant=43989795340529] | |||
=Other Brands= | |||
*Mosquito - 60 mm3/sec TPU [https://www.sliceengineering.com/products/mosquito-prime?variant=43989795340529] | |||
=Clones= | =Clones= | ||
*Clones now exist on Aliexpress with 4 nozzles - $50 - [https://www.aliexpress.com/item/4000061599238.html?spm=2114.12057483.0.0.462c123e8cJZ1e] | *Clones now exist on Aliexpress with 4 nozzles - $50 - [https://www.aliexpress.com/item/4000061599238.html?spm=2114.12057483.0.0.462c123e8cJZ1e] | ||
*0.4 to 1.2 mm supervolcanoes at $8.40 each - [https://www.aliexpress.com/item/4000230196031.html?spm=a2g0o.productlist.0.0.5fb86b5eL0rimy&algo_pvid=3844d43a-729d-4b06-a6fb-b67d2ace9efd&algo_expid=3844d43a-729d-4b06-a6fb-b67d2ace9efd-3&btsid=f65eaeb0-a70d-495c-b5b4-e2b9a72da38e&ws_ab_test=searchweb0_0,searchweb201602_4,searchweb201603_52] | *'''0.4 to 1.2 mm supervolcanoes at $8.40 each''' - [https://www.aliexpress.com/item/4000230196031.html?spm=a2g0o.productlist.0.0.5fb86b5eL0rimy&algo_pvid=3844d43a-729d-4b06-a6fb-b67d2ace9efd&algo_expid=3844d43a-729d-4b06-a6fb-b67d2ace9efd-3&btsid=f65eaeb0-a70d-495c-b5b4-e2b9a72da38e&ws_ab_test=searchweb0_0,searchweb201602_4,searchweb201603_52] | ||
=Shorter Long Nozzles= | =Shorter Long Nozzles= | ||
*32 mm long - [https://www.aliexpress.com/item/32839725746.html?spm=a2g0o.detail.1000060.1.60191461oWXGeh&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=98e71efa-dc76-46da-877f-057c827a949a] | *32 mm long - [https://www.aliexpress.com/item/32839725746.html?spm=a2g0o.detail.1000060.1.60191461oWXGeh&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=98e71efa-dc76-46da-877f-057c827a949a] | ||
=Internal Links= | |||
*[[Scalable Heater Block]] (OSE development to improve on the concept of the Supervolcano) | |||
*[[Supervolcano Heater Block]] | |||
*[[D3D Pro v20.07]] | |||
*[[D3D v20.04.27]] | |||
=External Links= | |||
*[https://e3d-online.com/the-e3d-supervolcano The E3D Official Website/Store's Page on the E3D Supervolcano] | |||
**As of this edit, if not buying a nozzle kit option (ie just the included [[1mm FDM 3D Printer Nozzle]] ) it is: | |||
***$132.00 USD for the 12v Version and 119.00 USD for the 24v Version | |||
***+ Taxes and Shipping | |||
***( [[User: Eric]] here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version ) | |||
*[https://youtu.be/h0LxiKVpQHQ?si=xpKw9akiFfch4T1M A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ] ( '''~15 Minute Watch''' ) | |||
*[https://youtu.be/uYjzflA9Q5Y?si=VK__Avix4oG5a3Gq A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ] ( '''~4 Minute Watch''' ) | |||
**Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for [[Touch Probes]] and other [[Bed Leveling Probes]] etc | |||
[[Category: 3D Printing]] | |||
Latest revision as of 23:01, 29 December 2024
Hint: E3D site shows 200g/hr Print Rate, or about 5kg/day.
Basics
- Supervolcano is the fastest nozzle and extruder - capable of extruding up to 10 lb of material per day.
- (This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the Golliath Hotend
- For example, print pavers at 10 lb each per day. With 10 lb block - equivalent to -
Other Brands
- Mosquito - 60 mm3/sec TPU [1]
Other Brands
- Mosquito - 60 mm3/sec TPU [2]
Clones
- Clones now exist on Aliexpress with 4 nozzles - $50 - [3]
- 0.4 to 1.2 mm supervolcanoes at $8.40 each - [4]
Shorter Long Nozzles
- 32 mm long - [5]
Internal Links
- Scalable Heater Block (OSE development to improve on the concept of the Supervolcano)
- Supervolcano Heater Block
- D3D Pro v20.07
- D3D v20.04.27
External Links
- The E3D Official Website/Store's Page on the E3D Supervolcano
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- $132.00 USD for the 12v Version and 119.00 USD for the 24v Version
- + Taxes and Shipping
- ( User: Eric here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version )
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
- A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ( ~15 Minute Watch )
- A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ( ~4 Minute Watch )
- Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for Touch Probes and other Bed Leveling Probes etc