File:Mainextruderpart.fcstd: Difference between revisions
Jump to navigation
Jump to search
(Marcin uploaded a new version of File:Mainextruderpart.fcstd) |
(Marcin uploaded a new version of File:Mainextruderpart.fcstd) |
||
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Notes= | =Notes= | ||
*'''17:00, 21 July 2020''' Reduces part count by 1 if it works, as it no longer requires 8 mm screws, which can be replaced by 18 mm screws, that are already used. | |||
*'''01:53, 9 January 2020''' - does not belong here and is not the latest part (since then the fan duckt has been trimmed and the duct hole corrected on the exit side | |||
*'''21:33, 8 January 2020''' - trimmed down base by 2 mm - and turned to dumb file | *'''21:33, 8 January 2020''' - trimmed down base by 2 mm - and turned to dumb file | ||
*Trim base by 1.5 mm so motor can fit better - fan will be 1.5 mm too high but that's ok. | *Trim base by 1.5 mm so motor can fit better - fan will be 1.5 mm too high but that's ok. | ||
Latest revision as of 22:42, 21 July 2020
Notes
- 17:00, 21 July 2020 Reduces part count by 1 if it works, as it no longer requires 8 mm screws, which can be replaced by 18 mm screws, that are already used.
- 01:53, 9 January 2020 - does not belong here and is not the latest part (since then the fan duckt has been trimmed and the duct hole corrected on the exit side
- 21:33, 8 January 2020 - trimmed down base by 2 mm - and turned to dumb file
- Trim base by 1.5 mm so motor can fit better - fan will be 1.5 mm too high but that's ok.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 22:42, 21 July 2020 | (243 KB) | Marcin (talk | contribs) | Dumb version with chamfer for print removal. |
| 22:00, 21 July 2020 | (956 KB) | Marcin (talk | contribs) | Shallowed spring hole by 2 mm, and deepened 3 side screw holes from 8 to 18 mm. | |
| 22:08, 12 January 2020 | (488 KB) | Marcin (talk | contribs) | Enlarged spring holder pocket to 10.8 mm diameter, and thickened bottom of spring holder by 0.5 mm | |
| 22:02, 12 January 2020 | (338 KB) | Marcin (talk | contribs) | Deepened mount hole by 0.5 mm and widened the spring holder by 1.5 mm | |
| 07:53, 9 January 2020 | (581 KB) | Marcin (talk | contribs) | Thickened and hole positions corrected | |
| 05:15, 9 January 2020 | (62 KB) | Marcin (talk | contribs) | Part named correctly. | |
| 04:11, 9 January 2020 | (59 KB) | Marcin (talk | contribs) | Dumb object. | |
| 04:10, 9 January 2020 | (640 KB) | Marcin (talk | contribs) | Fixed up all holes. | |
| 03:43, 9 January 2020 | (262 KB) | Marcin (talk | contribs) | Plugged up 2 side holes. | |
| 03:38, 9 January 2020 | (156 KB) | Marcin (talk | contribs) | Trimmed out hole in addition to lowering motor base by 2 mm |
You cannot overwrite this file.
File usage
The following 5 pages use this file: