D3D v20.04.27 Software: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Marlin= #define Y_MAX_POS 457// 18x18x17 inch #define X_MAX_POS 457 #define Z_MAX_POS 432 #define LEFT_PROBE_BED_POSITION 120 // #define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"...") |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Marlin= | =Marlin= | ||
#define Y_MAX_POS 457// 18x18x17 inch | |||
==Download== | |||
[[File:marlin_D3D_Pro_3.zip]] | |||
==Change Log== | |||
Values changed to: | |||
#define Y_MAX_POS 457// 18x18x17 inch bed | |||
#define X_MAX_POS 457 | #define X_MAX_POS 457 | ||
#define Z_MAX_POS 432 | #define Z_MAX_POS 432 | ||
#define LEFT_PROBE_BED_POSITION 120 // | #define LEFT_PROBE_BED_POSITION 120 // 4 corners for probing are larger. | ||
#define RIGHT_PROBE_BED_POSITION 350 // | #define RIGHT_PROBE_BED_POSITION 350 // | ||
#define FRONT_PROBE_BED_POSITION 120 // | #define FRONT_PROBE_BED_POSITION 120 // | ||
| Line 10: | Line 17: | ||
#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3" | #define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3" | ||
Note also: since [[D3D Pro 2]] - the Z probing speed has been changed 3x faster so that the bed raises and probes faster. This will reduce the torque on z, so that reducing this will help get more Z carrying capacity on the bed. D3D Pro 3 v2 carries only 4.5 kg extra weight on homing, which would likely rise if homing speed were slower to increase motor torque. | |||
=PID Autotuning= | |||
See [[PID Autotune]] | |||
=3D printer Profile= | |||
[[File:D3D_pro_3.ini]] | |||
#Move over more to hit bed | |||
#Do autoparallel | |||
Latest revision as of 01:23, 16 March 2021
Marlin
Download
Change Log
Values changed to:
- define Y_MAX_POS 457// 18x18x17 inch bed
- define X_MAX_POS 457
- define Z_MAX_POS 432
- define LEFT_PROBE_BED_POSITION 120 // 4 corners for probing are larger.
- define RIGHT_PROBE_BED_POSITION 350 //
- define FRONT_PROBE_BED_POSITION 120 //
- define BACK_PROBE_BED_POSITION 350
- define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"#define CUSTOM_MACHINE_NAME "OSE D3D Pro 3"
Note also: since D3D Pro 2 - the Z probing speed has been changed 3x faster so that the bed raises and probes faster. This will reduce the torque on z, so that reducing this will help get more Z carrying capacity on the bed. D3D Pro 3 v2 carries only 4.5 kg extra weight on homing, which would likely rise if homing speed were slower to increase motor torque.
PID Autotuning
See PID Autotune
3D printer Profile
- Move over more to hit bed
- Do autoparallel