Latest revision as of 09:10, 1 June 2020

Basics

Inkjet printer is to printed essays as this is to assembled PCBs
Merges [this and the [Open Source Digital Fabrication Construction Set]] along with misc other tech
Endgoal is click to circuit, early iterations may be less easy of a workflow

System consists of 1 mm bit - which can do up to the circuit cutout step from bulk.
Drill holes, mill, and cut out final product.
Use Pick and Place for automated mounting of components. (and Solder Paste + some form of heating for Reflow Soldering
Use D3D CNC Circuit Mill
Through-hole is ok, as well as SMD.

@@ Line 1: / Line 1: @@
+=Basics=
+*Inkjet printer is to printed essays as this is to assembled [[PCBs]]
+*Merges [[https://wiki.opensourceecology.org/wiki/Construction_Sets#Electronics.2FComputer_Stuff this] and the [Open Source Digital Fabrication Construction Set]] along with misc other tech
+*Endgoal is click to circuit, early iterations may be less easy of a workflow
+=Plotting=
 *System consists of 1 mm bit - which can do up to the circuit cutout step from bulk.
 *Drill holes, mill, and cut out final product.
-*Use pick and place for automated mounting of components.
+*Use [[Pick and Place]] for automated mounting of components. (and [[Solder Paste]] + some form of heating for [[Reflow Soldering]]
-*Use D3D-based cnc circuit mill
+*Use [[D3D CNC Circuit Mill]]
+*[[Through-hole]] is ok, as well as [[SMD]].
+=Internal Links=
+*[[PCB]]
+=External Links=
+*?
+[[Category:Electronics]]