Dirk 3D Printed Electric Motor Build Instructions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "<html><iframe src="https://docs.google.com/document/d/e/2PACX-1vR8yJ6Zb-UYiMHD0RZGoi6tnyxP5FKXcxoKaEYV8P2usPyYC0gk2h4yFXafK6PCHA/pub?embedded=true"></iframe></html> [https://...") |
(→Intro: add english) |
||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
<html><iframe src="https://docs.google.com/document/d/e/2PACX-1vR8yJ6Zb-UYiMHD0RZGoi6tnyxP5FKXcxoKaEYV8P2usPyYC0gk2h4yFXafK6PCHA/pub?embedded=true"></iframe></html> | |||
=Intro= | |||
This was built, produced 30W with a single stator + 2 rotors. Because the stators are harder to build, 2 rotors were used instead to optimize magnetic field usage. | |||
<html><iframe src="https://docs.google.com/document/d/e/2PACX-1vR8yJ6Zb-UYiMHD0RZGoi6tnyxP5FKXcxoKaEYV8P2usPyYC0gk2h4yFXafK6PCHA/pub?embedded=true" height=500 width=800></iframe></html> | |||
[https://docs.google.com/document/d/11zQrNhCqZO4Ikrfj5OuRLKsffCw4YDv6/edit edit] | [https://docs.google.com/document/d/11zQrNhCqZO4Ikrfj5OuRLKsffCw4YDv6/edit edit] | ||
<html><iframe src="https://docs.google.com/document/d/1kVq-z6-KMIley3IfiekDIb-80YoIJZ6w5tCDCubuiJs/pub?embedded=true" height=500 width=800></iframe></html> | |||
[https://docs.google.com/document/d/1kVq-z6-KMIley3IfiekDIb-80YoIJZ6w5tCDCubuiJs/edit?usp=sharing edit] | |||
=Links= | |||
*[[Dirk's Electric Motor]] | |||
Latest revision as of 01:35, 30 September 2020
Intro
This was built, produced 30W with a single stator + 2 rotors. Because the stators are harder to build, 2 rotors were used instead to optimize magnetic field usage.