Monica Log: Difference between revisions
Nottern link (talk | contribs) No edit summary |
Nottern link (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
=Tuesday July 9, 2013= | =July 2013= | ||
==Tuesday July 9, 2013== | |||
Working on the changes for the [[Stock Pivot Plate]] | Working on the changes for the [[Stock Pivot Plate]] | ||
| Line 6: | Line 7: | ||
=June 2013= | |||
<span style="color:red">Great work! See [[Justin Log]] for tag team continuation. We have discussed using 1/4"x4"x4" square tube for the spokes so that we can make the wheel scalable by extending the length of the tubing. Justin is working on finishing the 3" hub to be a standalone module. | <span style="color:red">Great work! See [[Justin Log]] for tag team continuation. We have discussed using 1/4"x4"x4" square tube for the spokes so that we can make the wheel scalable by extending the length of the tubing. Justin is working on finishing the 3" hub to be a standalone module. | ||
Wowwwww How big do you want to scale it? | Wowwwww How big do you want to scale it? | ||
=Friday June 21, 2013= | ==Friday June 21, 2013== | ||
Split collar. I'm not sure if this was what you were asking for. | Split collar. I'm not sure if this was what you were asking for. | ||
| Line 24: | Line 25: | ||
'''Monica: Should the collar be split on both sides as in [[3_Inch_Wheel_Hub]]?''' | '''Monica: Should the collar be split on both sides as in [[3_Inch_Wheel_Hub]]?''' | ||
=Monday June 17, 2013= | ==Monday June 17, 2013== | ||
First came the 0,5" keyway in the hub | First came the 0,5" keyway in the hub | ||
| Line 46: | Line 47: | ||
Here is the file. [[File:Wheel-0617.skp]] | Here is the file. [[File:Wheel-0617.skp]] | ||
=Sunday June 16, 2013= | ==Sunday June 16, 2013== | ||
Started building the wheel hub and disks to structure the wheel. The exterior disk of the hub is 12" and the smaller is 6". The hole, as expected is 3". | Started building the wheel hub and disks to structure the wheel. The exterior disk of the hub is 12" and the smaller is 6". The hole, as expected is 3". | ||
| Line 56: | Line 57: | ||
<span style="color:green"> The wheel itself has a [[3 Inch Wheel Hub]] but no bearing. Bearings are part of wheel units in [[Cory Log]] for use in Bulldozer and Trucktor. </span>. | <span style="color:green"> The wheel itself has a [[3 Inch Wheel Hub]] but no bearing. Bearings are part of wheel units in [[Cory Log]] for use in Bulldozer and Trucktor. </span>. | ||
=Saturday June 15, 2013= | ==Saturday June 15, 2013== | ||
Found a STEP CAD file of the FYR 3 SKF bearing that could be used. | Found a STEP CAD file of the FYR 3 SKF bearing that could be used. | ||
| Line 71: | Line 72: | ||
=Friday June 14, 2013= | ==Friday June 14, 2013== | ||
Monica has started on the large steel tractor wheel [[File:Wheel.skp]] | Monica has started on the large steel tractor wheel [[File:Wheel.skp]] | ||
Revision as of 04:32, 10 July 2013
July 2013
Tuesday July 9, 2013
Working on the changes for the Stock Pivot Plate
June 2013
Great work! See Justin Log for tag team continuation. We have discussed using 1/4"x4"x4" square tube for the spokes so that we can make the wheel scalable by extending the length of the tubing. Justin is working on finishing the 3" hub to be a standalone module.
Wowwwww How big do you want to scale it?
Friday June 21, 2013
Split collar. I'm not sure if this was what you were asking for. It's not easy to erase both disks to put the hub.
I've been with a cold. Still not 100% recovered.
Monica: Should the collar be split on both sides as in 3_Inch_Wheel_Hub?
Monday June 17, 2013
First came the 0,5" keyway in the hub
Then came the disks, with an external diameter of 2' and a thickness of 0,5".
Then came the angles (2"x2"x1/4") and their attachment to the pipe of the wheel (a 1,75"x1,75"x4" solid with a 3/4" hole and two 0,5" side holes)
So the wheel now looks like this
And here is the updated file. I'm not familiar with dimensions after making groups and all that. I'm lacking of bolts too. Here is the file. File:Wheel-0617.skp
Sunday June 16, 2013
Started building the wheel hub and disks to structure the wheel. The exterior disk of the hub is 12" and the smaller is 6". The hole, as expected is 3".
All the parts are in the same file. File:Wheel-0616.skp
The wheel itself has a 3 Inch Wheel Hub but no bearing. Bearings are part of wheel units in Cory Log for use in Bulldozer and Trucktor. .
Saturday June 15, 2013
Found a STEP CAD file of the FYR 3 SKF bearing that could be used.
Note: It can be expensive. Or, it could be cheap: [1]
I've been trying to import it too sketchup (in the right scale xD) without success. I'll continue in the morning.
Friday June 14, 2013
Monica has started on the large steel tractor wheel File:Wheel.skp
I think that 2 bolts (1/2") can be enough for the connection of the tracks. The thread could be inside the track or may be a parker bolt should be a better choice. I used a 40" pipe Sch XS (0,5" thickness) for the exterior of the wheel. Rubber should be put between that and the tracks.