Quarter Inch Stock Tubing: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 3: Line 3:
[[File:10footstocktube.dxf]]
[[File:10footstocktube.dxf]]


=Stock Square Rounded Tubing=
=Stock Square (with Rounded-Corners) Tubing=
From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]
From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]]



Revision as of 01:16, 14 August 2013

DXF for CNC Cutting of a 10 Foot Length

File:10footstocktube.dxf

Stock Square (with Rounded-Corners) Tubing

From Monica Log on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file File:Warehouse-Rounded-tubes-and-plates-big-holes.skp

Error creating thumbnail: File missing

Tibor gave me a great tip for the tangent arcs: lines should be made before arcs in order to make them. So instead of doing the inner arcs first, do the lines.

Made a tutorial for using arrays in the tube construction. In this case from a 4" tube, we get a 40" in less than a minute. Then, all that's left is cleaning details.