File:G22 Hydraulic Pump coupler sleeve.FCstd: Difference between revisions
Jump to navigation
Jump to search
(Hydraulic pump coupler sleeve for powercube v17.08. The bolt holes should be correct but the length of cylinder is was not specific in the schematics, and the length was guessed.) |
AbeAnderson (talk | contribs) (AbeAnderson uploaded a new version of File:G22 Hydraulic Pump coupler sleeve.FCstd) |
(No difference)
| |
Latest revision as of 12:59, 6 February 2018
Hydraulic pump coupler sleeve for powercube v17.08. The bolt holes should be correct but the length of cylinder is was not specific in the schematics, and the length was guessed.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 12:59, 6 February 2018 | (20 KB) | AbeAnderson (talk | contribs) | adjusted length to 3in by a diameter of 2.5in according to measurements. editable. |
| 01:21, 20 August 2017 | (24 KB) | JMikler (talk | contribs) | Hydraulic pump coupler sleeve for powercube v17.08. The bolt holes should be correct but the length of cylinder is was not specific in the schematics, and the length was guessed. |
You cannot overwrite this file.
File usage
The following 2 pages use this file: