File:D3dframe layout.dxf: Difference between revisions
Jump to navigation
Jump to search
(Marcin uploaded a new version of File:D3dframe layout.dxf) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Hint| | {{Hint|Recommended metal gauges is 11 gauge or 1/8", though 10 and 12 gauge will work as well. The frame file below uses a 4'x8' sheet of steel for cutting. If we use a 5'x10' sheet of steel - then we can get 20", 18", 16", 14", 12", and 10" frames with respectively smaller possible print area. Thus, each 5x10 sheet gets you 18 frame sets, minimizing material waste.}} | ||
=Version History= | =Version History= | ||
*the April 4, 2017 version is 4-nested. Optimizing material use over the original | *the April 4, 2017 version is 4-nested. Optimizing material use over the original | ||
*20 February 2017 version is 3-nested | *20 February 2017 version is 3-nested | ||
Revision as of 22:29, 3 October 2018
Hint: Recommended metal gauges is 11 gauge or 1/8", though 10 and 12 gauge will work as well. The frame file below uses a 4'x8' sheet of steel for cutting. If we use a 5'x10' sheet of steel - then we can get 20", 18", 16", 14", 12", and 10" frames with respectively smaller possible print area. Thus, each 5x10 sheet gets you 18 frame sets, minimizing material waste.
Version History
- the April 4, 2017 version is 4-nested. Optimizing material use over the original
- 20 February 2017 version is 3-nested
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 18:53, 14 November 2018 | (91 KB) | Marcin (talk | contribs) | removed double lines |
| 18:52, 14 November 2018 | (91 KB) | Marcin (talk | contribs) | ||
| 16:24, 13 November 2018 | (93 KB) | Marcin (talk | contribs) | 9 frame sets on a 4x8 foot sheet of mild steel. Gauge 12 preferred, but gauge 11 works as well. | |
| 00:18, 10 November 2018 | (93 KB) | Marcin (talk | contribs) | 18 frames (3 sets of frames) for cutting out of a 4'x8' sheet of steel | |
| 00:15, 10 November 2018 | (49 KB) | Marcin (talk | contribs) | 6 frames with all holes | |
| 23:47, 9 November 2018 | (49 KB) | Marcin (talk | contribs) | ||
| 23:21, 9 November 2018 | (37 KB) | Marcin (talk | contribs) | 3 frames | |
| 23:06, 9 November 2018 | (30 KB) | Marcin (talk | contribs) | Single set of frames, not finished. | |
| 17:16, 3 August 2018 | (53 KB) | Marcin (talk | contribs) | Added holes for mounting y and z axes. | |
| 16:49, 3 August 2018 | (38 KB) | Marcin (talk | contribs) | One whole 4x8 foot sheet with 16", 14", 12", 10", 8" nested for up to 5 usable frame sets. |
You cannot overwrite this file.
File usage
The following 2 pages use this file: