Revision as of 00:57, 13 November 2018

Working Doc

Adding a print cooling fan. Use these part libraries

8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - File:D3D Mini Sub-Assembly Extruder Bottom Mount.fcstd
Extruder bottom mount by Jose Urra - File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd and File:Extruder Holder April 14.FCStd
Extruder bottom holder derivative by Marcin. Download - File:Bottomholder.fcstd

@@ Line 22: / Line 22: @@
 File:check.png|Extruder bottom mount by Polemidis - [[File:D3D_Mini_Sub-Assembly_Extruder_Bottom_Mount.fcstd]]
 extruderbottom.jpg|Extruder bottom mount by Jose Urra - [[File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd]] and [[File:Extruder Holder April 14.FCStd]]
-File:bottomholder|Extruder bottom holder derivative by Marcin [[File:bottomholder.jpg]] Download - [[File:bottomholder.fcstd]]
+bottomholder.jpg|Extruder bottom holder derivative by Marcin. Download - [[File:bottomholder.fcstd]]
 </gallery>