Revision as of 21:49, 15 November 2018

Working Doc

Adding a print cooling fan. Use these part libraries

Extruder mount carriage. - FreeCAD - File:Extruder mount carriage.fcstd. STL - File:Extruder mount carriage.stl
8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl Issue: when motor gets hot, this gets loose.
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - File:D3D Mini Sub-Assembly Extruder Bottom Mount.fcstd
Extruder bottom mount by Jose Urra - File:X Universal Axis Motor Interface Horizontal Position Motor Bottom Version.FCStd and File:Extruder Holder April 14.FCStd
Extruder bottom holder derivative by Marcin. Download - File:Bottomholder.fcstd
Stock Titan Aero mount. See [3].

@@ Line 12: / Line 12: @@
 <gallery perrow=6>
+File:carriageCAD.jpg|[[File:check.png]]'''Extruder mount carriage.''' - FreeCAD - [[File:extruder_mount_carriage.fcstd]]. STL - [[File:extruder_mount_carriage.stl]]
 File:8mmsensor.jpg|8 mm sensor. Download - [[File:8mmsensor.fcstd]]
 File:extruderholder.jpg|[[File:check.png]] '''[1] D3D Extruder Holder.''' [[File:Motor interface.fcstd]] , [[File:Motor interface.stl]] '''Issue: when motor gets hot, this gets loose.