Jeremy Log: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
'''Power Experiment Links:''' | '''Power Experiment Links:''' | ||
SlideDeck 1[https://docs.google.com/presentation/d/1V1BPIPhp_uNGqxmrwu-a_KvtxPR22Sp2K4KSjf3SCu4/edit#slide=id.g6d20bddd26_0_20], wiki batterypack page[https://wiki.opensourceecology.org/wiki/Open_Source_Battery_Pack], PowerPanel Wiki[https://wiki.opensourceecology.org/wiki/Power_Panel], Term. Block[https://wiki.opensourceecology.org/wiki/3D_Printed_Terminal_Block], Electrod Holder[https://wiki.opensourceecology.org/wiki/DIY_Welding_Electrode_Holder], Light Dimmer Slides [https://docs.google.com/presentation/d/1Xfd0wTVurm0_rpbndPsZx-sffqXemGJ5vQnayCINLpY/edit#slide=id.g414d767b01_0_3] [https://docs.google.com/presentation/d/1gAvP_va_87GubBUmOIPV6x1YmmUcZtbZ-My8CLBnTgg/edit#slide=id.g4303b70038_0_0] | SlideDeck 1[https://docs.google.com/presentation/d/1V1BPIPhp_uNGqxmrwu-a_KvtxPR22Sp2K4KSjf3SCu4/edit#slide=id.g6d20bddd26_0_20], wiki batterypack page[https://wiki.opensourceecology.org/wiki/Open_Source_Battery_Pack], PowerPanel Wiki[https://wiki.opensourceecology.org/wiki/Power_Panel], Term. Block[https://wiki.opensourceecology.org/wiki/3D_Printed_Terminal_Block], Electrod Holder[https://wiki.opensourceecology.org/wiki/DIY_Welding_Electrode_Holder], Light Dimmer Slides [https://docs.google.com/presentation/d/1Xfd0wTVurm0_rpbndPsZx-sffqXemGJ5vQnayCINLpY/edit#slide=id.g414d767b01_0_3] [https://docs.google.com/presentation/d/1gAvP_va_87GubBUmOIPV6x1YmmUcZtbZ-My8CLBnTgg/edit#slide=id.g4303b70038_0_0] | ||
'''D3D Issue-O-Day:''' | |||
Started printing plotter attachment and y-axis movement issues. Spend to long on troubleshoot. Ended up tweaking alignment of rails, and tracking down idler bearing not spinning freely. Also learned that the nozzle heat break fan is really good for ruining adhesion on the side of the bed its aimed at. Thinking future versions should move the air upwards, or possibly turn the fan off for the first few layers. Can we find a passive cooling solution? | |||
Experiencing slight nozzle drag on nozzle moves. Is this an axis alignment issue, carriage free movement, or steps/mm? | |||
== '''January 28, 2020:''' == | == '''January 28, 2020:''' == | ||
Revision as of 20:42, 29 January 2020
January 29, 2020:
Power Experiment Links: SlideDeck 1[1], wiki batterypack page[2], PowerPanel Wiki[3], Term. Block[4], Electrod Holder[5], Light Dimmer Slides [6] [7]
D3D Issue-O-Day:
Started printing plotter attachment and y-axis movement issues. Spend to long on troubleshoot. Ended up tweaking alignment of rails, and tracking down idler bearing not spinning freely. Also learned that the nozzle heat break fan is really good for ruining adhesion on the side of the bed its aimed at. Thinking future versions should move the air upwards, or possibly turn the fan off for the first few layers. Can we find a passive cooling solution?
Experiencing slight nozzle drag on nozzle moves. Is this an axis alignment issue, carriage free movement, or steps/mm?
January 28, 2020:
Researching wiki for current CNC mill progress, looking for previous CAD that is usable to attach to D3D-U. Found firmware info and spindle mount and Full working prototype from earlier D3D
Good Videos for FreeCad: Slicing parts from assemblies that are already created and have had their layers "flattened". FreeCad 0.18 PART WB using SLICE and SLICE APART FreeCAD of a simple screwdriver - drawn and printed.
Reviewed Arduino homemade documents and photos from Texas.
January 27, 2020:
Reviewed Wiki usage documents etc. Ran calibration prints and temp calibration print in D3D-U. Youtube tutorials on inkscape -> gcode. Pushed fresh install of mediawiki to sandbox server for learning purposes.
Sunday January 26:
Baby Step Calibration Procedure. D3D Universal Build Manual Calibration of D3D universal- Local. First Prints on FB Page