D3D v20.04 Calculations: Difference between revisions
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
*Thus, if steppers can hold 25 additional lb, that would suffice for any print whatsoever. Let's test. See [[D3D v20.04 Data Collection]]. | *Thus, if steppers can hold 25 additional lb, that would suffice for any print whatsoever. Let's test. See [[D3D v20.04 Data Collection]]. | ||
*turns out that at most about 7-10 lb can be lifted in addition to bed weight. | *turns out that at most about 7-10 lb can be lifted in addition to bed weight. | ||
=Links= | |||
*[[D3D v20.04]] |
Revision as of 06:41, 20 April 2020
Bed Weight and Lifting Capacity
- Motors advertised at 84 oz in or 5.25 in lb
- with 1/2 diameter pulley, that is about 20 lb driver force - about right.
- Total lift is 40 lb from both sides
- Weight of bed - 7.5 lb for top and bottom, 3.5 lb for sides. Rods - .7 lb per foot, we have 3 feet - 2 lb more. Insulation - maybe 1.4 lb / cu ft [1]. We have 1/6 cubic foot, so only a quarter pounder of fluff.
- Bed volume of 1440 cu in, is 25 lb of max plastic mass that can be printed.
- Density of plastics is about 1 g/cc. [2]. So 1 liter is about 1 kg.
- Thus, if steppers can hold 25 additional lb, that would suffice for any print whatsoever. Let's test. See D3D v20.04 Data Collection.
- turns out that at most about 7-10 lb can be lifted in addition to bed weight.