Open Source Continuous Charcoal Production Device: Difference between revisions
Jump to navigation
Jump to search
(Moved some content to a more fitting page) |
(Moved some content to a more fitting page) |
||
| Line 17: | Line 17: | ||
See the CCS-Lite system, $4k for continuous charcoal production. http://www.biocoal.org/4.html | See the CCS-Lite system, $4k for continuous charcoal production. http://www.biocoal.org/4.html | ||
* | *=Commercial | ||
=Appropriate Technology | |||
*CCS-Lite - [http://www.biocoal.org/4.html] | |||
=DIY | |||
*Drive On Wood forum thread - [http://forum.driveonwood.com/t/making-charcoal-continuously/1636] | |||
=See Also= | =See Also= | ||
* | * | ||
Revision as of 01:08, 8 May 2020
Basics
- Part of the Open Source Fuels Construction Set.
- Something like this essentially:
- May be slightly more refined though
- Use the D3D Ceramic Printer instead of metal barrels to increase core temperature, as well as prevent degredation due to rust.
- Add automation to the auger via a control circuit, a servo motor, and some sort of sensor
- Add temperature probes for checking everything is going smoothly + troubleshooting issues
- Add a feedstock auger system
Temp Trashcan
- Temporary Dump for moved stuff
- =Pellet Based System
=Links
See the CCS-Lite system, $4k for continuous charcoal production. http://www.biocoal.org/4.html
- =Commercial
=Appropriate Technology
- CCS-Lite - [1]
=DIY
- Drive On Wood forum thread - [2]