Open Source Continuous Charcoal Production Device: Difference between revisions
Jump to navigation
Jump to search
(Moved some content to a more fitting page) |
(Moved some content to a more fitting page) |
||
| Line 24: | Line 24: | ||
=DIY | =DIY | ||
*Drive On Wood forum thread - [http://forum.driveonwood.com/t/making-charcoal-continuously/1636] | *Drive On Wood forum thread - [http://forum.driveonwood.com/t/making-charcoal-continuously/1636] | ||
*=Continuous Charcoal Maker | |||
<html><iframe src="https://docs.google.com/spreadsheets/d/1FM7-RT5FLP16N58TmOgT3-yJDS_GGNSfd-InFuAViD8/pubhtml?widget=true&headers=false" height=500 width=500></iframe></html> | |||
[https://docs.google.com/spreadsheets/d/1FM7-RT5FLP16N58TmOgT3-yJDS_GGNSfd-InFuAViD8/edit#gid=1 edit] | |||
=See Also= | =See Also= | ||
Revision as of 01:09, 8 May 2020
Basics
- Part of the Open Source Fuels Construction Set.
- Something like this essentially:
- May be slightly more refined though
- Use the D3D Ceramic Printer instead of metal barrels to increase core temperature, as well as prevent degredation due to rust.
- Add automation to the auger via a control circuit, a servo motor, and some sort of sensor
- Add temperature probes for checking everything is going smoothly + troubleshooting issues
- Add a feedstock auger system
Temp Trashcan
- Temporary Dump for moved stuff
- =Pellet Based System
=Links
See the CCS-Lite system, $4k for continuous charcoal production. http://www.biocoal.org/4.html
- =Commercial
=Appropriate Technology
- CCS-Lite - [1]
=DIY
- Drive On Wood forum thread - [2]
- =Continuous Charcoal Maker