Jeff Higdon Log: Difference between revisions
Jump to navigation
Jump to search
Jeff Higdon (talk | contribs) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{RightTOC}} | {{RightTOC}} | ||
'''Key Links: - [[Jeff's Manual]]. [https://docs.google.com/presentation/d/ | '''Key Links: - [[Jeff's Manual]]. [https://docs.google.com/presentation/d/1f_0KDNVRlLjAWSGWOq5WAk3OiPOOAClcL-FWZ7RhT_8/edit#slide=id.gdf8588382a_0_0 Jeff Critical Path]. [[MJ Log]].''' | ||
<html><iframe width="600" height="400" src="https://osedev.org/wiki/Jeff?start=9/1/2019"></iframe></html> | <html><iframe width="600" height="400" src="https://osedev.org/wiki/Jeff?start=9/1/2019"></iframe></html> | ||
Revision as of 18:37, 17 June 2021
Key Links: - Jeff's Manual. Jeff Critical Path. MJ Log.
Links:
Thu Jun 10, 2021
edit File:File:Jefffreecadbadge.png
Wed Jun 9, 2021
Hydraulics for shop. 7 hp electric motor, spins at 1475 rpms at 208 volts, can power a 5 gallon per minute pump.
Tue Jun 8, 2021
MicroTrac Mower. File:PTO Hydraulic Motor.fcstd
Mon June 7, 2021
It took me a bit to figure my way around FreeCad, but once I understood what was being said it seemed pretty easy, at least for this entry level test. I watched the two five minute videos but that was too quick for me to catch and retain everything. The video that helped the most was the one taken in Tom’s shop.
I think if someone was over my shoulder pointing out what was what, I could have learned it much quicker. As it was it was still reasonable in time, it took about 1.5 hours to watch the various videos, replay them a few times , draw a variety of things, then do the drawing required for the test.
Jeff