Revision as of 22:46, 29 December 2024

{{Hint|E3D site shows 200g/hr Print Rate, or about 5kg/day]]}

Basics

Supervolcano is the fastest nozzle and extruder - capable of extruding up to 20 lb of material per day.
- (This is from the "Revision as of 18:04, 16 January 2021" ) This reccord may be now surpassed by the Golliath Hotend

The E3D Official Website/Store's Page on the E3D Supervolcano
- As of this edit, if not buying a nozzle kit option (ie just the included 1mm FDM 3D Printer Nozzle ) it is:
  - $132.00 USD for the 12v Version and 119.00 USD for the 24v Version
  - + Taxes and Shipping
  - ( User: Eric here, did every step up until paying and got $28.00 for non-rapid shipping, ("FedEx® International Connect Local Postal Service" ) so a total of $160.00 assuming there are no suprises mid-shipping (import charged when it lands in the border etc) for the 12v version )
A Video by the YouTube Channel "The 3D Print General" Titled "Taking it to the Extreme with the SUPER Volcano" ( ~15 Minute Watch )
A Video by the YouTube Channel "Ooznest" Titled "Setting Up & Printing With the E3D Super Volcano | Ooznest" ( ~4 Minute Watch )
- Goes over modifications needed due to the longer "stick out length" ; extensions to the mount for Touch Probes and other Bed Leveling Probes etc

Revision as of 22:44, 29 December 2024 (view source) Marcin (talk \| contribs) No edit summary ← Older edit		Revision as of 22:46, 29 December 2024 (view source) Marcin (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	{{Hint\|E3D site shows [[200g/hr Print Rate]]}		{{Hint\|E3D site shows [[200g/hr Print Rate]], or about 5kg/day]]}

	=Basics=		=Basics=