Revision as of 16:17, 30 October 2012

See Power Cube 6 for latest Power Cube Documentation. Tom is currently building Power Cube VII - optimizing form factor for ergonomics. The power cube after that is Power Cube VIII. See Machine Naming Convention.

Date

Coupler -

@@ Line 1: / Line 1: @@
-October 2007 - under construction - Power Cube 6 replica by Tom Griffing. Power Cube 7 is the version to be built by OSE in a Collaborative Production run.
+See [[Power Cube 6]] for latest Power Cube Documentation. [[Tom]] is currently building [[Power Cube VII]] - optimizing form factor for ergonomics. The power cube after that is Power Cube VIII. See [[Machine Naming Convention]].
+=Date=
+*Slated for Sat Nov 9 - Sun Nov 10.
+*[[Tom Griffing]] is [[Guest Collaborative Production Run Director]]
+==Preparation==
+*Lathe up and running for spline coupler
+**Tom has a coupler jig
+*Lathe gearing via PowerCube + [[6 Spline PTO Motor]]
+=BOM=
+*How much of http://opensourceecology.org/wiki/Power_Cube_6/Bill_of_Materials is still accurate?
+=Fabrication Diagram=
+See [[Fabrication Diagram]] explanation.
+<html><img src="https://docs.google.com/drawings/pub?id=1KmkEsN6OPySaH11YeaQg51PJVuTzHqHMuWSajwRU8_4&amp;w=900&amp;h=500"></html>
+[https://docs.google.com/drawings/d/1KmkEsN6OPySaH11YeaQg51PJVuTzHqHMuWSajwRU8_4/edit edit]
+=Fabrication=
+Coupler -
+<html> <iframe width="300" height="169" src="https://www.youtube.com/embed//GDALEaHXt1g" frameborder="0" allowfullscreen></iframe> </html>