Power Cube VII: Difference between revisions
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
[https://docs.google.com/drawings/d/1YYZBY_p2aQgqtSqWPkUsxobEfX67Edc_B75mfpW6R_g/edit edit] | [https://docs.google.com/drawings/d/1YYZBY_p2aQgqtSqWPkUsxobEfX67Edc_B75mfpW6R_g/edit edit] | ||
==Quick Connect Plate for Power Cube Pump Detail== | |||
<html><img src="https://docs.google.com/drawings/pub?id=1NWPOwqrX-lcUZzmg073TT0rtvWSU3PkZUCa2_EOpWTM&w=480&h=360"></html> | |||
=Fabrication= | =Fabrication= | ||
Revision as of 16:47, 30 October 2012
See Power Cube 6 for latest Power Cube Documentation. Tom is currently building Power Cube VII - optimizing form factor for ergonomics. The power cube after that is Power Cube VIII. See Machine Naming Convention.
Date
- Slated for Sat Nov 9 - Sun Nov 10.
- Tom Griffing is Guest Collaborative Production Run Director
Preparation
- Lathe up and running for spline coupler
- Tom has a coupler jig
- Lathe gearing via PowerCube + 6 Spline PTO Motor
BOM
- How much of http://opensourceecology.org/wiki/Power_Cube_6/Bill_of_Materials is still accurate?
Fabrication Diagram
See Fabrication Diagram explanation.
Power HyperCube VII
HyperCube for Hypermodularity.
Quick Connect Plate for Power Cube Pump Detail
Fabrication
Coupler -