Modular Power Cube Frame: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*Draw up Power Cube - download latest model from [[Tom Griffing]], or use [[Power Cube 6]] download of Sketchup | *Draw up Power Cube - download latest model from [[Tom Griffing]], or use [[Power Cube 6]] download of Sketchup | ||
*Draw plain cube with xyz corners. It is basis for microtractor, see [[6 in 60 Initial 3D Models]] | *Draw plain cube with xyz corners. It is basis for microtractor, see [[6 in 60 Initial 3D Models]] | ||
*Draw | *Draw 1/4"x4"x4" tubing with 1" holes every 4 inches | ||
*Generate STL file for producing 3D prints with 1/2" tubing and 1/8" holes | *Generate STL file for producing 3D prints with 1/2" tubing and 1/8" holes | ||
**Tubing may be filled, as long as holes are present | **Tubing may be filled, as long as holes are present | ||
Revision as of 08:31, 11 May 2013
Introduction
- Draw up Power Cube - download latest model from Tom Griffing, or use Power Cube 6 download of Sketchup
- Draw plain cube with xyz corners. It is basis for microtractor, see 6 in 60 Initial 3D Models
- Draw 1/4"x4"x4" tubing with 1" holes every 4 inches
- Generate STL file for producing 3D prints with 1/2" tubing and 1/8" holes
- Tubing may be filled, as long as holes are present
- Generate toolpath file for Lulzbot or RepRap Kit, work with Leo Dearden
- Share file with Leo and FeF Lulzbot
- Video assembly of the frame into an instructional
- Use 1/8" pegs or bolts for connectors.
- Document all results on this wiki page.