Quarter Inch Stock Tubing: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Hello.") |
No edit summary |
||
| Line 1: | Line 1: | ||
=Stock Square Rounded Tubing= | |||
From [[Monica Log]] on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file [[File:Warehouse-Rounded-tubes-and-plates-big-holes.skp]] | |||
[[File:Warehouse-0714.png|400px]] | |||
[[Tibor_Log|Tibor]] gave me a '''great tip''' for the tangent arcs: lines should be made before arcs in order to make them. So instead of doing the inner arcs first, do the lines. | |||
Made a tutorial for using arrays in the tube construction. In this case from a 4" tube, we get a 40" in less than a minute. Then, all that's left is cleaning details. | |||
<div><html><iframe width="560" height="315" src="//www.youtube.com/embed/UFjAJFr-NRY" frameborder="0" allowfullscreen></iframe></div></html> | |||
Revision as of 01:01, 14 August 2013
Stock Square Rounded Tubing
From Monica Log on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file File:Warehouse-Rounded-tubes-and-plates-big-holes.skp
Error creating thumbnail: File missing
Tibor gave me a great tip for the tangent arcs: lines should be made before arcs in order to make them. So instead of doing the inner arcs first, do the lines.
Made a tutorial for using arrays in the tube construction. In this case from a 4" tube, we get a 40" in less than a minute. Then, all that's left is cleaning details.