Quarter Inch Stock Tubing: Difference between revisions
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
[[File:FreeCAD Tubing Library.tar.gz]] | [[File:FreeCAD Tubing Library.tar.gz]] | ||
[[Image:tubing screenshot.jpg|thumb|Sample tubing from the tubing library. This is a representation of stock USA 4" steel. This is drawn as blocks with holes (no rounded corners or wall) to optimize rapid manipulation for more complex designs. Added April 25, 2016]]. | |||
Revision as of 07:35, 26 April 2016
FreeCAD Tubing Library
These are individual FreeCAD files. Intended workflow is Merge in the file menu to add these parts to a document in FreeCAD.
File:FreeCAD Tubing Library.tar.gz
.
DXF for CNC Cutting of a 10 Foot Length
Note: Sketchup work below is outdated as we transition to FreeCAD as the official OSE part library.
Stock Square Tubing (with Rounded-Corners)
From Monica Log on July 14, 2013 - The result includes the stock pivot plate, all plates with 1 1/8" diameter holes and both 1/4" and 1/2" thick tube profiles. This is the file File:Warehouse-Rounded-tubes-and-plates-big-holes.skp. Note: tubing with square corners is preferable in Sketchup, as it can be put together much more easily.
Tibor gave me a great tip for the tangent arcs: lines should be made before arcs in order to make them. So instead of doing the inner arcs first, do the lines.
Made a tutorial for using arrays in the tube construction. In this case from a 4" tube, we get a 40" in less than a minute. Then, all that's left is cleaning details.
Links
- Warehouse contains tubing with square corners, not rounded corners - for ease of working in Sketchup.