Talk:Universal CNC Axis: Difference between revisions
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
**Need proper length machine screw with allen wrench head | **Need proper length machine screw with allen wrench head | ||
**https://www.mcmaster.com/#91292a139/=14su0or M6x30 Socket Head | **https://www.mcmaster.com/#91292a139/=14su0or M6x30 Socket Head | ||
*Attaching Motor and Idler Side to Frame | |||
**Have to use a washer and nut external to the Printed Piece | |||
**Could replace hex head bolt with a Socket Head Bolt | |||
***would be able to tighten with a nut on other side, then mount to frame wall with more nuts | |||
Revision as of 02:29, 29 October 2016
Future Design Changes
- Frame Flanges
- Change frame flage bolts from phillips head to hex heads
- screwdriver isnt ideal
- Frame bolts probably need washers
- Design currently has #8 size bolts, a little loose inside of the holes. 7/32? use metric?
- Change frame flage bolts from phillips head to hex heads
- Frame Axis Mount
- Carriage and smooth Rods may bump into the frame's flange mounting bolts
- Attaching Motor and Idler Side to Carriage of another axis
- Need proper length machine screw with allen wrench head
- https://www.mcmaster.com/#91292a139/=14su0or M6x30 Socket Head
- Attaching Motor and Idler Side to Frame
- Have to use a washer and nut external to the Printed Piece
- Could replace hex head bolt with a Socket Head Bolt
- would be able to tighten with a nut on other side, then mount to frame wall with more nuts