Talk:MicroTrac Controller v17.10/Code

Code Examples

• http://www.doctormonk.com/2012/05/sparkfun-venus-gps-and-arduino.html
  • uses arduino's pin 10 for software serial

ideas

• use capital letter for relay ON and lower case letter for OFF.
• transmit continuous stream of current switch settings
• shut down if stream times out
• remote box could request gps coordinates by sending a "?"
  • onboard could resond "¿" when ready
  • remote will pause stream, onboard will broadcast gps, then continue.

controller setup loop

setup

enter AT command mode

print "+++"

set network ID

read EEPROM setting

ATID0x909

set destination address

controller loops

loop

read pin for LF (left track forward)

if HIGH

print "A" to serial

otherwise print "a"

...

print n

if n = 8

n = 1

else n ++;