Talk:Shopaid: Difference between revisions
Lex Berezhny (talk | contribs) No edit summary |
(Asked if the camera module has ISO / Exposure Adjustments + if the focus knob is a worthy addition.) |
||
| Line 13: | Line 13: | ||
^ Yes, absolutely, but for now the focus is just getting the documentation station working. --[[User:Lex Berezhny|Lex Berezhny]] ([[User talk:Lex Berezhny|talk]]) 01:53, 13 November 2017 (CET) | ^ Yes, absolutely, but for now the focus is just getting the documentation station working. --[[User:Lex Berezhny|Lex Berezhny]] ([[User talk:Lex Berezhny|talk]]) 01:53, 13 November 2017 (CET) | ||
^ Sounds good! So i was reading up on the camera module, any idea if it does focus/exposure adjustments (in the code maybe) ? Granted that wouldn't be that bad if it didn't but anyways just curious. Also should we put this in the parts list: | |||
https://www.adafruit.com/product/3518 | |||
It appears to be a focus knob for the camera module, which may come in handy. It is pretty inexpensive, although we could maybe 3d print one ourselves. --[[User:Eric]] | |||
Revision as of 01:56, 13 November 2017
- On the subject of screens there is a device called the "manga screen" it is fully open source both in hardware and software. It is around the dimensions of a phone screen, has either a 720p or a 1080p screen, and is multitouch capable. It also uses standard USB and HDMI, no weird connectors. It may be worth a look, and here are some links.
http://wiki.thing-printer.com/index.php?title=Manga_Screen
https://www.thing-printer.com/product/manga-screen/
For this project specifically this could be used for input while the other USB display could be used for monitoring data such as the video recording.
-Also this could maybe be combined into a "robotic arm construction set" ; we would use two "robotic arm modules" for the shopaid, many more for an assembly line, so on and so forth.
^ Yes, absolutely, but for now the focus is just getting the documentation station working. --Lex Berezhny (talk) 01:53, 13 November 2017 (CET)
^ Sounds good! So i was reading up on the camera module, any idea if it does focus/exposure adjustments (in the code maybe) ? Granted that wouldn't be that bad if it didn't but anyways just curious. Also should we put this in the parts list:
https://www.adafruit.com/product/3518
It appears to be a focus knob for the camera module, which may come in handy. It is pretty inexpensive, although we could maybe 3d print one ourselves. --User:Eric