D3D Ohio v18.02: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 54: Line 54:


==Development Log==
==Development Log==
===5/8/2018===
To get this up to date, the CAD is rendered.
Today, I am assymbuling the printer. I have 4 of the Universal Axis Units built, but only have the timing belt in one of them.
GOAL:
From today, I am going to try and cut the PVC pipes.
11:30
From the D3D frame gen, I have a pipe length of precisely 493.546mm that's 19.43094488"... so, I'll rationalize this down to 19 1/25" because then, you can push the pipe in so it totally snugly grabs around the corner fitting. I'll see how this cut works.
all cuts took a half hour. I like this fit. ! Pictures as soon as I get my file server up again...


===3/2/2018===
===3/2/2018===
Line 62: Line 76:
[[File:D3DOH18.01 V0.2 FULL ASSYM.png|1000x1000px|border|First Rendering!]]
[[File:D3DOH18.01 V0.2 FULL ASSYM.png|1000x1000px|border|First Rendering!]]


I have a great deal to learn in Freecad on more adv. assym work. Such as how There are parameters for assymblies, and there is a linked parameter for rod lenght between the Right and left Y universal axis so you can change lenght in one spot. super cool.  
I have a great deal to learn in Freecad on more adv. assym work. Such as how There are parameters for assymblies, and there is a linked parameter for rod lenght between the Right and left Y universal axis so you can change lenght in one spot. super cool.


=See Also=
=See Also=

Revision as of 04:30, 9 May 2018

Basics

  • A variation of the D3D 3D Plastic FDM Printer that has a 12 inch print bed, Made with a PVC frame

http://opensourceecology.org/wiki/D3D_Extruder

CAD

Most recent Render: http://opensourceecology.org/wiki/File:D3D_OHIO_18.01_V0.3_WIP.fcstd

BOM

  • Sensor - 8 mm sensing - 18 mm diameter - [1]

Modeling

The intention of this section is to show the most up-to-date CAD module visually as it is developed. Versus the development log, this will attempt to show the "best" work or "Stable" versions

V1.0.0 Latest version uploaded.

-Uses short idler. 500mm steel rods. allows for an extra inch on x and y axis.

Ready for calculation review!

V0.3 DONE - This will be a rendering with 1" PVC tube and corners, 12" bed and a http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd extruder changed for what is currently present in V0.2

This file has been uploaded as is, currently we just have some part movement and a 12" bed



FILE V1.0

12" bed. check calcs for measurements. File:D3D OHIO 18.01 V0.3 WIP.fcstd

Video

Packing

Development

[WIP NEEDS DONE}

edit


Development Log

5/8/2018

To get this up to date, the CAD is rendered.

Today, I am assymbuling the printer. I have 4 of the Universal Axis Units built, but only have the timing belt in one of them.

GOAL: From today, I am going to try and cut the PVC pipes.

11:30 From the D3D frame gen, I have a pipe length of precisely 493.546mm that's 19.43094488"... so, I'll rationalize this down to 19 1/25" because then, you can push the pipe in so it totally snugly grabs around the corner fitting. I'll see how this cut works.

all cuts took a half hour. I like this fit. ! Pictures as soon as I get my file server up again...

3/2/2018

Found a Basis for a render http://opensourceecology.org/wiki/File:Medium_Size_Version_12_in.FCStd

So ploted up: First Rendering!

I have a great deal to learn in Freecad on more adv. assym work. Such as how There are parameters for assymblies, and there is a linked parameter for rod lenght between the Right and left Y universal axis so you can change lenght in one spot. super cool.

See Also

Useful Links