3D Printer Troubleshooting Log: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Wed Nov 14, 2018= | =Wed Nov 14, 2018= | ||
*Issue on excessive retraction prior to start - [https://www.facebook.com/sara.bajor.988/videos/135807157402290/] | *Issue on excessive retraction prior to start - [https://www.facebook.com/sara.bajor.988/videos/135807157402290/] (See video comments for resolution of this issue.) | ||
=Nov 8, 2018= | =Nov 8, 2018= | ||
Revision as of 23:36, 15 November 2018
Wed Nov 14, 2018
- Issue on excessive retraction prior to start - [1] (See video comments for resolution of this issue.)
Nov 8, 2018
- Extruder mounting issues - [2]
Extruder
- If heat sink cooling fan breaks, nozzle will get stuck.
- To test for cooling fan effectiveness - pushing filament by hand should encounter norubbery springiness in the filament. If it feels springy while pushing manually - the transition zone is too hot (no cooling fan) and the filament will start to bend - feeling springy instead of stiff. Done on Lulzbot Mini.
- Nozzle cleaning - heat up nozzle with heat gun, and poke with acupuncture needles, which are .2 - .1 mm wide. Alternately, dip PLA in acetone overnight, and you won't need heat.
See Also
Useful Links
- Simplify3D - [3]