Simple 3D Printer Extruder: Difference between revisions
No edit summary |
(→CAD) |
||
| Line 21: | Line 21: | ||
*CAD & assemblies also @: https://gitlab.com/Abe_Anderson/d3d-mini-pvc/tree/master/Hardware/Simple%20Extruder | *CAD & assemblies also @: https://gitlab.com/Abe_Anderson/d3d-mini-pvc/tree/master/Hardware/Simple%20Extruder | ||
Note - some duplicate parts are listed below.. | Note - some duplicate parts are listed below. The four particular parts were used in the simple extruder build in London, Ontario in October, 2019. These have been added here with the hopes that we will somehow organize them better William - October, 2019 | ||
<gallery perrow=6> | <gallery perrow=6> | ||
Revision as of 15:09, 23 October 2019
Hint: This is a simple and basic low cost extruder for 1.75 mm filament that can be built from scratch. This is not necessarity optimized for rubber, and will not work with 3 mm filament in its basic form. This is an entry level extruder that can produce reliable prints, but is limited in filament size, will have slower rubber extrusion. Rubber Extruder is a 3mm extruder optimized for rubber, and also optimized for all other filaments.
Working Doc
Build
Pictures
Folder on Google - [1]
CAD
- Turn this to a gallery: https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
- CAD & assemblies also @: https://gitlab.com/Abe_Anderson/d3d-mini-pvc/tree/master/Hardware/Simple%20Extruder
Note - some duplicate parts are listed below. The four particular parts were used in the simple extruder build in London, Ontario in October, 2019. These have been added here with the hopes that we will somehow organize them better William - October, 2019
Simple Extruder Assembly - size:nullkb - FreeCAD -File:Simple Extruder Assembly.fcstd
Extruder Heater Block - size:nullkb - FreeCAD -File:Heaterblock.fcstd
Extruder Base Block - size:nullkb - FreeCAD -File:Baseblock.fcstd
Extruder Filament throat and Heat Break - size:nullkb - FreeCAD -File:Heatbreak.fcstd
Nozzle - size:nullkb - FreeCAD -File:Simple extruder nozzle.fcstd
Spring - size:nullkb - FreeCAD -File:Simpleextruderspring.fcstd
Bearing Bracket - FreeCAD -File:Simpleextruderbearingbracket.fcstd. STL - File:Simpleextruderbearingbracket.stl
Spring Base Bracket - FreeCAD -File:Simpleextruderspringbasebracket.fcstd. STL - File:Simpleextruderspringbasebracket.stl
Extruder Block- FreeCAD - File:D3D Simple Extruder Block.FCStd
Extruder Bracket 1- FreeCAD - File:D3D Simple Extruder Bracket 1.FCStd
Extruder Idler Bracket- FreeCAD - File:ExtruderIdlerBracket1910.FCStd
Extruder Idler Bracket- FreeCAD - File:ExtruderMountBracketv4Oct2019.FCStd
Reverse Engineering Pictures
Turn this to a gallery:
https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
Links
- Low cost 3D printer BOM - Simple 3D Printer BOM