Revision as of 19:38, 6 November 2019

CAD

16" Frame - FreeCAD -File:Frame16.fcstd
Angle Connector. - FreeCAD with McMaster 6 mm nut -File:Angleconnector.fcstd. Finished STL - File:Anglecorner.stl
Angle Connector with axis mount, left side. - FreeCAD - File:Leftcorner.fcstd. Finished STL - File:Leftcorner.stl
Angle Connector with axis mount, right side. - FreeCAD - File:Rightcorner.fcstd. Finished STL - File:Rightcorner.stl
Angle Connector with axis mount, right side. - FreeCAD - File:Rightcorner.fcstd. Finished STL - File:Rightcorner.stl
Y Axis from v19.06. - FreeCAD - File:Yaxisfrom1906.fcstd.

Revision as of 19:37, 6 November 2019 (view source) Marcin (talk \| contribs) (→‎CAD) ← Older edit		Revision as of 19:38, 6 November 2019 (view source) Marcin (talk \| contribs) (→‎CAD) Newer edit →
Line 5:		Line 5:


	File:~~frame16~~.png\|'''16" Frame ''' - FreeCAD -[[File:frame16.fcstd]]		File:14angleframe.png\|'''16" Frame ''' - FreeCAD -[[File:frame16.fcstd]]

	File:angleconnector.png\|'''Angle Connector.''' - FreeCAD with McMaster 6 mm nut -[[File:angleconnector.fcstd]]. Finished STL - [[File:anglecorner.stl]]		File:angleconnector.png\|'''Angle Connector.''' - FreeCAD with McMaster 6 mm nut -[[File:angleconnector.fcstd]]. Finished STL - [[File:anglecorner.stl]]