D3D v19.11: Difference between revisions
(→Bugs) |
(→Bugs) |
||
| Line 115: | Line 115: | ||
*Fix carriage to idler placement | *Fix carriage to idler placement | ||
*Improvement - Flexible surface for popping prints right off | *Improvement - Flexible surface for popping prints right off | ||
=Links= | |||
*[[D3D v19.06]] - other parts | |||
Revision as of 09:04, 2 December 2019
CAD
D3D v19.11 - FreeCAD -File:D3d1911.fcstd
16" Frame - FreeCAD -File:Frame16.fcstd
Angle Connector. - FreeCAD with McMaster 6 mm nut -File:Angleconnector.fcstd. Finished STL - File:Anglecorner.stl
Angle Connector with axis mount, left side. - FreeCAD - File:Leftcorner.fcstd. Finished STL - File:Leftcorner.stl
Angle Connector with axis mount, right side. - FreeCAD - File:Rightcorner.fcstd. Finished STL - File:Rightcorner.stl
Y Axis from v19.06. - FreeCAD - File:Yaxisfrom1906.fcstd.
X axis from v19.06. - FreeCAD - File:Xaxisfrom1906.fcstd.
Carriage motor merge. - FreeCAD - File:Carriage motor merge.fcstd. STL - File:Carriage motor merge.stl
Carriage half-carriage merge. - FreeCAD - File:Carriage halfcarriage merge.fcstd. STL - File:Carriage halfcarriage merge.stl.
Carriage extruder bracket merge. - FreeCAD - File:Integrated carriage.fcstd. STL - File:Integrated carriage.stl
Frame clip - FreeCAD - File:Frameclip.fcstd. STL - File:Frameclip.stl
'Carriage to bed connection. - FreeCAD - File:Carriage idler merge.fcstd. STL - File:Carriagebed.stl
'Motor side with clip. - FreeCAD - File:Motorwithclip.fcstd. STL - File:Motorwithclip.stl
'Idler side with clip. - FreeCAD - File:Idlerwithclip.fcstd. STL - File:Idlerwithclip.stl
'Cable clip. - FreeCAD - File:Cableclip.fcstd. STL - File:Cableclip.stl
Quick attach wiring.
Connector 1
| Extruder part | N° | Wire color |
|---|---|---|
| Heat sink fan | 1 | + red |
| 2 | - black | |
| Thermistor | 3 | orange |
| 4 | white | |
| Heater element | 5 | green |
| 6 | yellow | |
| Active cooling fan | 7 | + brown |
| 8 | - blue |
Connector 2
| Extruder part | N° | Wire color |
|---|---|---|
| Z-probe | 1 | brown |
| 2 | blue | |
| 3 | black | |
| Extruder stepper motor | 4 | green |
| 5 | yellow | |
| 6 | orange | |
| 7 | red |
Bugs
- Card slot 3D print - notch too large, card can be pushed in behind the slot
- Get rid of STOP PRINT from menu - can hit it accidentally during long print
- Fix belt hole in carriage to motor
- Fix carriage to idler placement
- Improvement - Flexible surface for popping prints right off
Links
- D3D v19.06 - other parts