Mini Drill Motor: Difference between revisions
Jump to navigation
Jump to search
(→Parts) |
(→Parts) |
||
| Line 1: | Line 1: | ||
=Parts= | =Parts= | ||
*$15 with chuck - [https://www.ebay.com/i/273158750475?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=273158750475&targetid=539174375915&device=c&mktype=pla&googleloc=9023315&poi=&campaignid=1881303721&mkgroupid=70239136935&rlsatarget=pla-539174375915&abcId=1139336&merchantid=118864055&gclid=EAIaIQobChMImrnu4JWQ5AIV6B-tBh3TKwPCEAQYBSABEgIrG_D_BwE] | *$15 with chuck - [https://www.ebay.com/i/273158750475?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=273158750475&targetid=539174375915&device=c&mktype=pla&googleloc=9023315&poi=&campaignid=1881303721&mkgroupid=70239136935&rlsatarget=pla-539174375915&abcId=1139336&merchantid=118864055&gclid=EAIaIQobChMImrnu4JWQ5AIV6B-tBh3TKwPCEAQYBSABEgIrG_D_BwE] | ||
*1/8" is 3.175 or 3.2 mm | |||
*Mini drill press, 3D printed, using above motor - [https://www.thingiverse.com/thing:1904920] | *Mini drill press, 3D printed, using above motor - [https://www.thingiverse.com/thing:1904920] | ||
*Hand-pump drill - [https://all3dp.com/everyone-needs-a-3d-printed-hand-pump-drill/] | *Hand-pump drill - [https://all3dp.com/everyone-needs-a-3d-printed-hand-pump-drill/] | ||
Revision as of 02:19, 14 December 2019
Parts
- $15 with chuck - [1]
- 1/8" is 3.175 or 3.2 mm
- Mini drill press, 3D printed, using above motor - [2]
- Hand-pump drill - [3]
- Chuck only, $10 on Amazon - [4]
- Coupler for motor - [5]
- 2.3 mm shaft version, 5V 1A, $11 - [6]
- 1 mm mill bits - 1/8" shank - [7]
- 2.3 mm drill bits are available
- 555 motor - $24 - 12-36v - [8]
Examples
555 spindle-less (not additional support bearings) motor can be used as a mill for education, though not production. Not only that - he makes a working Arduino.
Application with Spindle
- See John Log for spindle made with a small motor.