Open Source Pedal Powered Quadracycle: Difference between revisions
Jump to navigation
Jump to search
(Added some more links under the "External Links" section) |
(Added some more links under the "Industry Standards" Section) |
||
Line 9: | Line 9: | ||
*[[Rhoades Car]] | *[[Rhoades Car]] | ||
*[https://www.rswart.org/fourwhel.htm A Forum Post On All/Most Available Producers] | *[https://www.rswart.org/fourwhel.htm A Forum Post On All/Most Available Producers] | ||
*[http://www.xyzcargo.com/cycles/ XYZ Cargo Company] | |||
=Existing Open Source Designs= | =Existing Open Source Designs= |
Latest revision as of 00:00, 18 July 2020
Basics
- A Four Wheeled Bicycle of sorts
- Original Version will be a Two Seat, with a small trunk, and a trailer hitch
- A Cheap People/Cargo Mover for local areas (no fuel, little maitnence)
- Modular, so can start out as frame + drivechain + seats only, and grow into essentially an ac-less small car (low speed)
- Can also add a motor (assist) later if desired
Industry Standards
Existing Open Source Designs
N55 System
American Speedster
- Seem to be made with PVC Pipe?
- Their Website
University Studies/Designs
- California Polytechnic State University, San Luis Obispo - "The Quadricycle Hand and Foot Cycle" (used hand pedals too (and turning via seat twisting?) , not too needed, but intresting)
Minimum Viable Product
Rough Sketches
Top Down View
Basic Design
Frame
- Thinking Pipe or Tube
- PVC Pipe, Fiber Reinforced Pipe , Steel Pipe / Steel Tube / Aluminium Pipe / Aluminium Tube
- Also want it to be at least dissasembleable to module sections (ie not all welded, use bolts for maitnenece/upgrading)
Seats
- OTS or DIY
Drivetrain
- Two pedals (one for each person)
- Clutch on each for each person being able to not have feet "pushed" if not pedaling, or if there is not a seccond person
- Then goes to a gearbox
- Then goes to both wheel axles (possibly a differental on each)?
- Also optional KERS using a flywheel and clutch for non-electric boost for stop/go and hills etc
Wheels
- Most likely standard "bike" tires+wheels
- May need non-spoke versions for better load capacity (ie more like motorcycle/car wheel hubs)
Windsheild
- Cut Acrylic With Add-on Frame
Onboard Battery
- Small battery up to a 12v lead acid for onboard electronics, and systems (if wanted)
- Could also add a roof mounted flexible solar cell array
- Then misc things like headlights, turn signals, bike computer, internal lights, radio/stereo/gps etc
Trailer Hitch
- What is the "standard" ?
BOM
CAD
Internal Links
- Velomobile
- Fibre Reinforced Pipe 3D Printer possible structual material
- Modular Vehicles
- Team Wikispeed
- This Part of the "Construction Sets" page
- Open Source Small Vehicle Modular Trailer
External Links
- The Wikipedia Page on Quadracycles
- The Wikipedia Page on The EU Classification of Quadrocycles
- A GrabCAD Search on Pedal Vehicles