LifeTrac III/Manufacturing Instructions/Assemble: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 8: Line 8:
:*[[LifeTrac_Fab_Assemble_Hydraulics | Hydraulics]]
:*[[LifeTrac_Fab_Assemble_Hydraulics | Hydraulics]]


[http://makeprojects.com/Project/LifeTrac-Assemble-Arms/1101/1 Arms]
 
<html>
<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1101"></script> <p><a href="http://makeprojects.com/Project/LifeTrac-Assemble-Arms/1101/1">LifeTrac Assemble Arms</a></p>
</html>


[http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics]
[http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1 Hydraulics]
Line 17: Line 14:
<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1102"></script> <p><a href="http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1">LifeTrac Assemble Hydraulics</a></p>
<script type="text/javascript" src="http://static.ifixit.net/static/embed/make-embed.js?id=1102"></script> <p><a href="http://makeprojects.com/Project/LifeTrac-Assemble-Hydraulics/1102/1">LifeTrac Assemble Hydraulics</a></p>
</html>
</html>
==Arms==
===Tools===
*Jack
*Wrench
*Crescent Wrench
*WD-40
*Punch
*Mallet
*Hammer
===Materials===
*Arm Tubes (2x)
*Arm Hydraulic Mount Plates (4x)
*Frame Arm Mounts (2x)
*Rotational Shaft
*Crossbrace
**Crossbrace Mounts (4x)
*QA Plate
*Hydraulic Cylinders
**Short 2x
**Long 2x
*Locking Pins
*Hydraulic Pins 10x
**Cotter Pins 10x
===Safety===
*The arm and frame are HEAVY. ??? tons
**Be very cautious
**Wear steel toed boots
**Block wheels
===Steps===
*Lay Arm Tubes on Lifetrac Frame
*Place QA Plate on ground in front of arms.
*Lift Arms into position
*Insert Rotational Shaft through arms and Upper Frame Collars.
*Lay Arm Crossbrace between arms, on Lower Frame front.
*Bolt Crossbrace Mounts to Crossbrace
*Bolt Crossbrace Mounts to Arms (4x)
*Connect Arms to QA plate.
*Insert Pins
*Bolt Hydraulic Mount Plates to Arms (4x)
*Attach Hydraulic Arm Frame Mounts (2x)
*Mount Main Hydraulic Cylinders (2x) between Frame Mount and Arm Plates
**Insert Pins
*Mount Secondary Hydraulic Cylinders (2x) between QA plate and Arm Plates
**Insert Pins
*Insert Cotter Pins into all Pins
===Issues===
*Arm Rotation Shaft not gong through?
**Grind shaft.
**Ream holes
*Pins not fitting in hydraulic holes?
**Grind pins
*Collars come loose?
**Mallet, Punch, WD-40

Revision as of 21:39, 13 July 2011

LifeTrac Fab
Prepare - Cut - Drill - Misc - Assemble - Weld - Mount - Finish

Topics

Assemble


Hydraulics

LifeTrac Assemble Hydraulics

Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_III/Manufacturing_Instructions/Assemble&oldid=33443"