|
|
| Line 4: |
Line 4: |
|
| |
|
| =GVCS Projects - CAD Status= | | =GVCS Projects - CAD Status= |
| {{Wanted|Possible to integrate those status bars into the table?}}
| |
|
| |
|
|
| |
|
Revision as of 08:37, 8 December 2011
Overview
This page is used to see what the different members of the CAD team are working on and the overall status of CAD on the different projects going on. If you're working on something, please edit this page and update it with what you're up to.
GVCS Projects - CAD Status
| Project
|
Modeling
|
Drawings
|
Comments
|
| CEB Press
|
 | 95% |
|
| 0% |
|
Only the hydraulic components and hose routing required on the modeling side.
|
| Rototiller
|
| 80% |
|
| 0% |
|
|
| Life Trac IV
|
| 20% |
|
| 0% |
|
|
| Modeling | |
|
85% |
|
| Drawings | |
|
0% |
|
CAD Team Current Work
You can follow what I'm doing at Factor e Farm via my log or just see my CAD updates below.
2011-12-07 - Did some quick sketches to get approximate sizes on hoses for the LifeTrac IV with the new bent loading arm.
2011-12-06 - I'm currently working on the piece part and assembly models for the Soil Pulverizer, CEB Press, and the Life Trac III loader arm redesign. I'm also working on revamping the entire CAD section of this Wiki
Rob, fill in what you're working on here...thanks again for the help!