Power Cube Fabrication Drawings

Introduction

Daniel Worth and Tom Griffing - here is the suggested order. Watch Ian's intro:

Available Media

• Assembly order video - http://www.youtube.com/watch?v=uuXWTjWEgu8
• Power Cube Playlist

Order of fabrication - desired pages in Fabrication Drawings Package

• Note: documentation will be for Factor e Farm power cubes, with several hundred hours of operation. Tom Griffing's may be the next version, but it has to be finished and tested.

Note: make sure fab drawings show comments on procedure as in video

1. Jig for multiple cubes
2. Welding frame detail
3. Fuel tank + soap test
4. Hydraulic tank + soap test
5. Engine Mount plate - needs details - see Power Cube Playlist - this may need to be broken into parts drawings and assembly drawings. Use the bolt strategy - it works well.
6. Mount pump to engine - notes on tightening from youtube videos
7. Insert engine
8. Mufflers - this is for old power cube (Show muffler fab). Note - mufflers were painful to attach once battery and other parts were in. Do this as soon as engine is in the frame.
9. Battery mounts
10. Cooler mount
11. This may be a good place for hydraulics diagrams - suction, power out to devices, cooler, return line
12. Fan mount
13. Quick attach plates welded (not shown in Ian's video?)
14. Suction hose connection
15. Return line filter
16. Key switch
17. Solenoid

1. Paint

Drawings by Daniel Worth

File:PowerCube-1.0.pdf - Power Cube frame drawing pending check and approval revision 0

File:PowerCube-2.0.pdf - Power Cube quick attachment drawing pending check and approval revision 0