File:Prusa i3 mk2 extruder adapted.fcstd
Jump to navigation
Jump to search
Prusa_i3_mk2_extruder_adapted.fcstd (file size: 2.26 MB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Old Version for 4 mm Sensor
With 8 mm Sensor - 6/18
Design Rationale
- Mounting plate close to body but distinct from carriage is a good idea - for good center of gravity close to X axis
- 3 Mounting Bolts must be present for the stepper motor
- Make it work with 3mm and 1.75mm filament
Notes
Version above does not work - sensor holder too high - need to lower it slightly.
Modification - 7/18
File with just body, cover, and sensor holder of extruder - for modification.
- File:Extruder modification.fcstd
- STL of extruder body - File:Extruder mod 8mm.stl
More Notes
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 05:02, 6 February 2018 | (2.26 MB) | Robinmaster18 (talk | contribs) | Changed to 8mm proximity sensor, added interface plate for magnets. Editable. |
| 19:25, 11 May 2017 | (3.21 MB) | Legocef (talk | contribs) | ||
| 15:37, 3 April 2017 | (3.24 MB) | Legocef (talk | contribs) | ||
| 12:10, 1 April 2017 | (2.87 MB) | Jose.urra (talk | contribs) | Test: not working the changes I made in FreeCad | |
| 12:06, 1 April 2017 | (2.87 MB) | Jose.urra (talk | contribs) | Improved Tree Structure based on modules and Assembly logic | |
| 12:03, 1 April 2017 | (2.87 MB) | Jose.urra (talk | contribs) | Improved tree structure based on logic of Assembly | |
| 18:47, 27 March 2017 | (2.86 MB) | Legocef (talk | contribs) | Original file from https://grabcad.com/library/original-prusa-i3-mk2-printer-1 | |
| 11:22, 27 March 2017 | (9.32 MB) | Legocef (talk | contribs) | ||
| 22:03, 26 March 2017 | (2.32 MB) | Legocef (talk | contribs) |
You cannot overwrite this file.
File usage
The following 6 pages use this file: