OSE Marlin

About

Note that the OSE wiki is tracking different versions of the D3D printer. There is one Official Release Version (currently D3D v19.02 for the last 12V version, and D3D_v19.04 as the first 24V version of the 3D printer.

Genealogy

• Marlin - File:Marlin v1902.zip - 0.8 mm nozzle. Change log: endstop_reversing was reversed on X and Y compared to former versions, where we now use default after going to plain endstop, and not the endstop breakout board. Cura profile - 0.8 nozzle with Volcano - File:Cura1902.ini
• File:Marlin v1810.zip - 0.4 mm nozzle. Cura profile - File:Marlin v1810.ini

Links

For D3D software, see D3D_v18.10#OSE_Marlin

Lulzbot Source

• OSE D3D 3D printer builds upon Marlin, Lulzbot Cura, and the Lulzbot Mini 2 omnidirectional fan shroud. D3D and Lulzbot have the same extruder in common - we both use the E3D Titan Aero extruder. This means that the extruder configuration is identical for both printers - such as retraction settings, steps per mm, etc.
• See Lulzbot Mini software here - http://download.lulzbot.com/Mini/2.0.0/software/marlin/