File:Extruder main.stl
Jump to navigation
Jump to search
Extruder_main.stl (file size: 140 KB, MIME type: application/sla)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes with Newest on Top
- Settings - 1.2 nozzle but thin wall - 0.7 - to allow holes to work
- Settings - 1.2 nozzle
- Result with 1.2 - idler screw by spring has no meat on 1 mm thick web under screw.
- Holes are egged out on side
- May work because it's quite stiff.
- Try with 1 mm nozzle
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 22:45, 21 July 2020 | (140 KB) | Marcin (talk | contribs) | Version with shallower spring hole by 2 mm. Deepening of side holes to 18 mm for part count reduction. Chamfer for print removal. |
| 07:26, 13 January 2020 | (110 KB) | Marcin (talk | contribs) | Laid flat. | |
| 22:09, 12 January 2020 | (110 KB) | Marcin (talk | contribs) | Deepened mounting bolt hole by 0.5 mm, thickened up the spring mount with + larger hole | |
| 05:46, 9 January 2020 | (99 KB) | Marcin (talk | contribs) | Corrected for 1.2 mm nozzle production engineering. | |
| 04:33, 7 December 2019 | (81 KB) | Marcin (talk | contribs) | With gussets, thicker web, chamfer | |
| 03:31, 6 December 2019 | (68 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 5 pages use this file: