Open Source Continuous Charcoal Production Device

Basics

• Part of the Open Source Fuels Construction Set.
• Something like this essentially:
• May be slightly more refined though
• Use the D3D Ceramic Printer instead of metal barrels to increase core temperature, as well as prevent degredation due to rust.
• Add automation to the auger via a control circuit, a servo motor, and some sort of sensor
• Add temperature probes for checking everything is going smoothly + troubleshooting issues
• Add a feedstock auger system

Temp Trashcan

• Temporary Dump for moved stuff
• =Pellet Based System

=Links See the CCS-Lite system, $4k for continuous charcoal production. http://www.biocoal.org/4.html

• =Commercial

=Appropriate Technology

• CCS-Lite - [1]

=DIY

• Drive On Wood forum thread - [2]

• =Continuous Charcoal Maker

edit

Useful Links

• Relevant Research?
• A Hackaday Project on an Updraft Continous Gassifier for Biochar