Monica Log
Tuesday July 9, 2013
Working on the changes for the Stock Pivot Plate
Great work! See Justin Log for tag team continuation. We have discussed using 1/4"x4"x4" square tube for the spokes so that we can make the wheel scalable by extending the length of the tubing. Justin is working on finishing the 3" hub to be a standalone module.
Wowwwww How big do you want to scale it?
Friday June 21, 2013
Split collar. I'm not sure if this was what you were asking for. It's not easy to erase both disks to put the hub.
I've been with a cold. Still not 100% recovered.
Monica: Should the collar be split on both sides as in 3_Inch_Wheel_Hub?
Monday June 17, 2013
First came the 0,5" keyway in the hub
Then came the disks, with an external diameter of 2' and a thickness of 0,5".
Then came the angles (2"x2"x1/4") and their attachment to the pipe of the wheel (a 1,75"x1,75"x4" solid with a 3/4" hole and two 0,5" side holes)
So the wheel now looks like this
And here is the updated file. I'm not familiar with dimensions after making groups and all that. I'm lacking of bolts too. Here is the file. File:Wheel-0617.skp
Sunday June 16, 2013
Started building the wheel hub and disks to structure the wheel. The exterior disk of the hub is 12" and the smaller is 6". The hole, as expected is 3".
All the parts are in the same file. File:Wheel-0616.skp
The wheel itself has a 3 Inch Wheel Hub but no bearing. Bearings are part of wheel units in Cory Log for use in Bulldozer and Trucktor. .
Saturday June 15, 2013
Found a STEP CAD file of the FYR 3 SKF bearing that could be used.
Note: It can be expensive. Or, it could be cheap: [1]
I've been trying to import it too sketchup (in the right scale xD) without success. I'll continue in the morning.
Friday June 14, 2013
Monica has started on the large steel tractor wheel File:Wheel.skp
I think that 2 bolts (1/2") can be enough for the connection of the tracks. The thread could be inside the track or may be a parker bolt should be a better choice. I used a 40" pipe Sch XS (0,5" thickness) for the exterior of the wheel. Rubber should be put between that and the tracks.