CEB Press Workshop 2016 Working Page

X for extreme manufacturing.

• FreeCAD file - File:CEBPressJuneGroup.fcstd
• CEB_Press_6#Instructional_Files - detailed instructions from 2014 build
• OSE Workshops FB Page - post all pictures there.
• Data - take any data notes here

Cut List

6 Abrasive Cutoff Saws

• [20] 2.5" square tube sleeves - 6" long
• [4] Hinges - 30" sections
• [2] Hopper Supports - 2" tube - 2.5' long
• [2] Hopper Supports - 2" tube - 3' long
• [4] Legs - 2" tube - 3' long
• [31] hopper slats - 24" long
• [1] slat - 56" long

Shot List

Part - Assemdbly - Module

• parts before any work
• grinding slag from each piece
• grinding all edges
• painting

Hopper

• Label all parts
• take picture of ALL parts before any work. Includes bolts.
• grinding slag from each piece
• grind sharp corners
• painting
• Mark holes on hinges from hopper pattern
• Mag drill holes in hopper pieces