CEB Press Workshop 2016 Working Page

From Open Source Ecology
Jump to: navigation, search

X for extreme manufacturing.

Cut List

6 Abrasive Cutoff Saws. Torch. Mag drill.

  • [20] 2.5" square tube sleeves - 6" long
  • Torch 1 hole for 3/4" bolts in all sleeves
  • [4] Hinges - 30" sections
  • [2] Hopper Supports - 2" tube - 2.5' long
  • [2] Hopper Supports - 2" tube - 3' long
  • [4] Legs - 2" tube - 3' long
  • [31] hopper slats - 24" long
  • [1] hopper slat - 56" long
  • [6] aluminum sheet metal

Shot List

Part - Assemdbly - Module

  • parts before any work
  • grinding slag from each piece
  • grinding all edges
  • painting

Hopper

  • Label all parts
  • take picture of ALL parts before any work. Includes bolts.
  • grinding slag from each piece
  • grind sharp corners
  • painting
  • Mark holes on hinges from hopper pattern
  • Mag drill holes in hopper pieces