D3D 1612 Software

From Open Source Ecology

Revision as of 01:14, 9 January 2018 by Marcin (talk | contribs) (→‎Cura)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Firmware

Download D3D_Marlin#D3D_16.22_Frame_12.22_Bed

Arduino IDE

Upload firmware software after connecting to RAMPS controller
Select Arduino Mega from Tools/Board. Select appropriate USB port from Tools/Port.
After software is done uploading, quit out of Arduino IDE and open up Cura

Cura

Open up Lulzbot Cura.
Cura already has the initialization profile on OSE Linux. If you are running it on a non-OSE Linux operating system, download D3D_Lulzbot_Cura#Configuration_Profile_-_Files

Known Error Messages and Solutions

If you get a COM1 error in the Arduino monotor - go to Tools/Port and select the correst USB port.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_1612_Software&oldid=163473"