D3D v19.02

Working Doc

edit

Build Sequence

• 

  Build sequence.

• 

  Build nozzle.

• 

  Build fan attachment.

• 

  Add sensor holder.

Part Library

• 

  OSE Extruder v19.02 - File:Oseextruder1902.fcstd. Volcano version, tighter fit on carriage, auto Y alignment.

• 

  OSE Extruder nozzle assemby. Holds fan and sensor. File:Nozzleassembly.fcstd. STL - File:Nozzleassembly.stl

• 

  Stock Titan Aero mount bracket. See [1]. Bracket - [2] - STEP + STL. Check out drawings from E3D - [3]. STEP of Bracket - File:Bracket.fcstd

• 

  Titan Aero with motor - [4]

• 

  Titan Aero mount top plate. File:Brackettop.fcstd. STL - File:Brackettop.stl

• 

  Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)

• 

  8 mm sensor. Download - File:8mmsensor.fcstd

• 

  File:5015blower.fcstd 5015 Blower

• 

  File:40x10fan.fcstd 40x10mm fan

Itemized Part Library

• Titan Aero with Volcano
• Carriage
• Rods
• Titan Aero Bracket
• Print Cooling Fan
• Print Cooling Fan Holde
• Height Sensor, 8 mm sensing distance
• Height Sensor Holder
• Fan duct
• Screws for mounting Titan Aero Bracket
• Cable Chain
• Stepper Wire. Use Flamingo Workbench to create wires as pipes.

Change Log

• Main change - Titan Aero with Volcano heater block.
• Develop auto-parallel of two Y axes
• Determine if 24V has visible performance improvement.
• Does the Volcano heater block use the same heater as the standard E3D version? Docs - [5]. Yes:
• Heater sourcing - [6]