D3D v18.10
Jump to navigation
Jump to search
Hint: D3D v18.09.2 has been renamed to v18.10
BOM
- See 3D Printer BOM
Cut List
Quality Control Checklist
Build Guide
Software
0.4 nozzle, Titan Aero, stock E3D nozzle. 1.75mm.
Exposes knob for manual feed.
OSE Marlin
File:Marlin v1810.zip. This and later versions have Babystepping Correction enabled for first print tuning - a critical feature that allows the bed to be leveled DURING the first print. This is all that is required for calibration of the printer.
Arduino Environment
Download Arduino Environment
OSE Lulzbot Cura
Download OSE Lulzbot Cura
OSE Lulzbot Cura Settings
Hint: This is the configuration file (printer profile) for D3D v18.10 official release
Download the printer profile - File:Marlin v1810.ini
Links
- D3D Genealogy
- Older software - D3D Marlin
- 3D Printer Manual
- GVCS