All public logs

Combined display of all available logs of Open Source Ecology. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 17:48, 21 May 2013 Samthetechie talk contribs uploaded File:Backhoe-sketchup.jpg (Screenshot of File:Backhoe.skp)
• 17:44, 21 May 2013 Samthetechie talk contribs uploaded a new version of File:Backhoe.skp (This version includes the following changes: *feedback from Marcin: "needs updating to mickey mouse" which includes this file *replaced the two pieces of 8 foot steel stock with updated component model: [[File:8_foot_stock_4_inch_square_tube_with_half_...)
• 17:27, 21 May 2013 Samthetechie talk contribs uploaded File:11 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 11 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:26, 21 May 2013 Samthetechie talk contribs uploaded File:10 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 10 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:25, 21 May 2013 Samthetechie talk contribs uploaded File:9 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 9 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:25, 21 May 2013 Samthetechie talk contribs uploaded File:8 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 8 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 17:09, 21 May 2013 Marcin talk contribs uploaded File:Stockpivot2.jpg
• 16:44, 21 May 2013 Samthetechie talk contribs uploaded File:10 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 16:44, 21 May 2013 Samthetechie talk contribs uploaded File:9 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 16:43, 21 May 2013 Samthetechie talk contribs uploaded File:8 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:44, 21 May 2013 Samthetechie talk contribs uploaded File:7 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:42, 21 May 2013 Samthetechie talk contribs uploaded File:7 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 7 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:39, 21 May 2013 Samthetechie talk contribs uploaded File:3 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 3 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:38, 21 May 2013 Samthetechie talk contribs uploaded File:4 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 4 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:38, 21 May 2013 Samthetechie talk contribs uploaded File:5 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 5 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:37, 21 May 2013 Samthetechie talk contribs uploaded File:6 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 6 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:37, 21 May 2013 Samthetechie talk contribs uploaded File:6 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:36, 21 May 2013 Samthetechie talk contribs uploaded File:5 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:36, 21 May 2013 Samthetechie talk contribs uploaded File:4 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:34, 21 May 2013 Samthetechie talk contribs uploaded File:3 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:10, 21 May 2013 Samthetechie talk contribs uploaded File:2 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:07, 21 May 2013 Samthetechie talk contribs uploaded File:2 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 2 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:06, 21 May 2013 Samthetechie talk contribs uploaded File:1 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 1 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup )
• 14:04, 21 May 2013 Samthetechie talk contribs uploaded File:1 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 14:02, 21 May 2013 IEF RD talk contribs uploaded File:Sae j2513.pdf (SAE standard for skid steer attachment.)
• 13:19, 21 May 2013 Samthetechie talk contribs uploaded File:11 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 12:23, 21 May 2013 Samthetechie talk contribs uploaded File:12 foot stock 4 inch square tube with half inch walls.jpg (Screenshot of 12 foot tube model which is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 12:20, 21 May 2013 Samthetechie talk contribs uploaded File:12 foot stock 4 inch square tube with half inch walls.skp (This is part of the Universal Constructor Set: Step 1 #Generate the tubing and plates in Sketchup)
• 07:17, 21 May 2013 User account Roli talk contribs was created by 212.243.83.34 talk
• 00:52, 21 May 2013 Husam Nasser talk contribs uploaded File:Scaled beam 19 inch.gcode
• 22:13, 20 May 2013 Gary DeMercurio talk contribs uploaded a new version of File:Warehouse.skp
• 22:11, 20 May 2013 Husam Nasser talk contribs uploaded a new version of File:Articulated pivot.skp
• 21:47, 20 May 2013 User account IEF RD talk contribs was created by 108.14.202.145 talk
• 21:44, 20 May 2013 Husam Nasser talk contribs uploaded File:Plates warehouse.skp
• 20:52, 20 May 2013 Husam Nasser talk contribs uploaded File:Plates.skp
• 20:15, 20 May 2013 Gary DeMercurio talk contribs uploaded File:Warehouse.skp
• 14:35, 20 May 2013 Jeff Nielsen talk contribs uploaded File:CampingDeathValley.jpeg (Picture of Jeff Nielsen for DPV application)
• 00:27, 20 May 2013 Marcin talk contribs deleted page 50 hp Power Cube (content was: "Based on VW Air Cooled Engine." (and the only contributor was "Marcin"))
• 23:41, 19 May 2013 Marcin talk contribs uploaded File:Qboblt.dxf
• 23:36, 19 May 2013 Marcin talk contribs uploaded File:Qabobcatconcept.jpg
• 23:32, 19 May 2013 Marcin talk contribs uploaded File:Qbobltdxf.jpg
• 03:49, 19 May 2013 Samthetechie talk contribs uploaded File:Stock Spacer Plate 8 inches x 8 inches.skp (Stock_Spacer_Plate_8_inches_x_8_inches.skp updated part of Backhoe_Boom_in_Sketchup this file revision addresses this point: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a littl...)
• 03:39, 19 May 2013 Samthetechie talk contribs uploaded a new version of File:Stock Pivot Plate.skp (adjusted 3" hole position as per feedback from Marcin.)
• 01:13, 19 May 2013 Samthetechie talk contribs uploaded File:Stock Bonding Plate 8 inches x 16 inches.skp (Stock_Bonding_Plate_8_inches_x_16_inches.skp updated part of Backhoe_Boom_in_Sketchup This file addresses this points: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too...)
• 23:36, 18 May 2013 Husam Nasser talk contribs uploaded a new version of File:Beam half size scaled 13-32.skp
• 23:33, 18 May 2013 Samthetechie talk contribs uploaded a new version of File:Stock Pivot Plate.skp (This files addresses these points: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too large. 2. The pivot plate should have 6 of the 1" holes, and the big hole should b...)
• 23:32, 18 May 2013 Husam Nasser talk contribs uploaded a new version of File:Beam half size scaled 13-32.skp
• 23:21, 18 May 2013 Samthetechie talk contribs uploaded File:Backhoe.skp (Backhoe.skp updated part of Backhoe_Boom_in_Sketchup)
• 23:12, 18 May 2013 Gary DeMercurio talk contribs uploaded File:BOM.odt
• 23:03, 18 May 2013 Gary DeMercurio talk contribs uploaded File:IronworkerBOM.skp