File:Mainextruderpart.fcstd
Jump to navigation
Jump to search
Mainextruderpart.fcstd (file size: 243 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- 01:53, 9 January 2020 - does not belong here and is not the latest part (since then the fan duckt has been trimmed and the duct hole corrected on the exit side
- 21:33, 8 January 2020 - trimmed down base by 2 mm - and turned to dumb file
- Trim base by 1.5 mm so motor can fit better - fan will be 1.5 mm too high but that's ok.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| 03:33, 9 January 2020 | (102 KB) | Marcin (talk | contribs) | ||
| 04:04, 8 December 2019 | (387 KB) | Marcin (talk | contribs) | Trimmed right side by 0.7 mm so motor can fit better. | |
| 04:08, 7 December 2019 | (336 KB) | Marcin (talk | contribs) | Added a gusset. | |
| 03:58, 7 December 2019 | (201 KB) | Marcin (talk | contribs) | Chamfered another corner. | |
| 03:55, 7 December 2019 | (201 KB) | Marcin (talk | contribs) | Thickened web of hole by spring, and chamfered that corner for more support. | |
| 04:30, 6 December 2019 | (40 KB) | Marcin (talk | contribs) | Transparent green. | |
| 04:24, 6 December 2019 | (40 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 5 pages use this file: