D3D Ohio v18.02
Basics
- A variation of the D3D 3D Plastic FDM Printer that has a 12 inch print bed, Made with a PVC frame
http://opensourceecology.org/wiki/D3D_Extruder
CAD
Most recent Render: http://opensourceecology.org/wiki/File:D3D_OHIO_18.01_V0.3_WIP.fcstd
BOM
- Sensor - 8 mm sensing - 18 mm diameter - [1]
Modeling
The intention of this section is to show the most up-to-date CAD module visually as it is developed. Versus the development log, this will attempt to show the "best" work or "Stable" versions
V1.0.0 Latest version uploaded.
-Uses short idler. 500mm steel rods. allows for an extra inch on x and y axis.
V0.3 DONE - This will be a rendering with 1" PVC tube and corners, 12" bed and a http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd extruder changed for what is currently present in V0.2
This file has been uploaded as is, currently we just have some part movement and a 12" bed
FILE V1.0
12" bed. check calcs for measurements. File:D3D OHIO 18.01 V0.3 WIP.fcstd
Video
Packing
Development
[WIP NEEDS DONE}
Development Log
5/8/2018
To get this up to date, the CAD is rendered.
Today, I am assymbuling the printer. I have 4 of the Universal Axis Units built, but only have the timing belt in one of them.
GOAL: From today, I am going to try and cut the PVC pipes.
11:30 From the D3D frame gen, I have a pipe length of precisely 493.546mm that's 19.43094488"... so, I'll rationalize this down to 19 1/25" because then, you can push the pipe in so it totally snugly grabs around the corner fitting. I'll see how this cut works.
all cuts took a half hour. I like this fit. ! Pictures as soon as I get my file server up again... Update 5/20 picture of build at this time:
3/2/2018
Found a Basis for a render http://opensourceecology.org/wiki/File:Medium_Size_Version_12_in.FCStd
So ploted up:
I have a great deal to learn in Freecad on more adv. assym work. Such as how There are parameters for assymblies, and there is a linked parameter for rod lenght between the Right and left Y universal axis so you can change lenght in one spot. super cool.
See Also
- D3D
- 3d Printing Techniques
- Open Source Digital Fabrication Construction Set
- D3D 1612 Product Manual
- TakacsLog
Useful Links
- Here is a note on the simplified model - https://www.youtube.com/watch?time_continue=38&v=Epit8c9zp8Q
- here are the simplified models we will build this off of past v0.3:http://opensourceecology.org/wiki/D3D_CNC_Circuit_Mill
- http://opensourceecology.org/wiki/3D_Printer_Genealogy
- https://www.youtube.com/watch?v=a7XAZhXt6Hk&feature=youtu.be
- D3D v18.02 BOM
- http://opensourceecology.org/wiki/D3D_Part_Library#Assembly_Index - This is all of our D3D assy. modules so far.
- http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd Extruder we will use
- http://opensourceecology.org/wiki/D3D_Instructional_videos_for_April,_29th,2017_Workshop << helpful instructions for temporary ref.